Thermal Properties		Conditions
		Pressure	State	ASTM
Coef of Thermal Expansion (10-6/ºC)	85 - 190			D696
Deflection Temperature (ºC)	44 - 140	0.46 MPa		D648
Thermal Conductivity (W/m-ºC)	0.150 - 0.188			C177

Physical & Electrical Properties		Conditions
		State	ASTM
Specific Gravity	1.1 - 1.28		D792
Water Absorption (% weight increase)	0.2 - 3.6	after 24 hrs	D570
Dielectric Strength (V/mil); 1/8" thick specimen unless noted	350 - 600		D149

Processing Properties		Conditions
		Type	ASTM
Melt Flow (gm/10 min)	3 - 12	at 190-240 ºC	D1238
Melting Temperature (ºC)	148 - 230	Tm, crystalline
Processing Temperature (ºC)	172 - 260	injection molding
	172 - 260	extrusion
Molding Pressure (MPa)	7 - 104
Compression Ratio	3 - 3.5
Linear Mold Shrinkage (cm/cm)	0.003 - 0.018		D955