engineering fundamentals Kern Electronics and Lasers, Inc.

Kern Electronics and Lasers, Inc.
Company
Profile

Kern Electroincs and Lasers, Inc. is a leading manufacturer of large format laser cutting and laser engraving systems. Kern has designed and manufactured laser cutting and engraving equipment since 1982.

Contact us for a samples kit and additional product information. Send us your materials and file and we will cut and engrave samples so you can see the quality behind the Kern Laser Systems!

Products
  • Large Format Laser Cutting Systems
  • Large Format Laser Engraving Systems
  • Metal Cutting Systems
  • 3D Laser Engraving Machines
  • High Speed Engraving Machines
Contact Derek Kern
Address 1501 Industrial Drive
Wadena, MN 56482
Country United States
Telephone 1-888-660-2755
Fax 1-218-631-3476
Email derek@kernlasers.com
Website www.kernlasers.com
 Showcase Products
 

click image to enlarge.
(HSE) High Speed Engraving

HSE is the newest gantry design of Kern Electronics & Lasers that combines fast engraving speeds (150” per second) and consistent beam power and beam quality over the entire table top for laser cutting and laser engraving . HSE stands for High Speed Engraving. The new gantry design develops 5G's force of acceleration to move the laser optics across the 52” table in less than 1 second.

Visit our website and request a literature packet to see quality samples and additional information. Send us your materials to engrave or cut and see the quality we offer.

-Manufacturing , Processing and Tooling > Cutting Tools
-Manufacturing , Processing and Tooling > Materials Processing
-Mechanical Components > Industrial Tools
 

click image to enlarge.
Metal Cutting System
The 52 series Laser Cutting System pictured here shows the Automatic Capacitive Sensing Height Follower and the metal grid work which is required for each laser metal cutting system.

The Automatic Capacitive Sensing Height Follower developed by Kern Electronics & Lasers, Inc. is one of the key elements when laser cutting mild steel and stainless steel for your custom metal cutting project. A sensor senses the capacitance from the end of the isolated cutting tip to the metal being cut. This information is fed into a Kern Height Follower Controller. The gap from the metal being cut and the cutting tip can be adjusted until a desired gap is obtained. The Kern Height Follower will then maintain that gap over the metal even if the metal has any distortion in the metal and maintain the proper focusing point.

A 150 watt laser is installed for cutting mild steel up to .090″, stainless steel up to .070″ and a 400 watt laser is installed for cutting mild steel up to .125″, stainless steel up to .100″.
-Manufacturing , Processing and Tooling > Cutting Tools
-Manufacturing , Processing and Tooling > Materials Processing
-Mechanical Components > Industrial Tools
 

click image to enlarge.
3D Laser Engraving System

Kern laser engraving systems can engrave at speeds up to 150"/sec with 5 G's of acceleration.

 

 

-Manufacturing , Processing and Tooling > Cutting Tools
-Manufacturing , Processing and Tooling > Materials Processing
-Mechanical Components > Industrial Tools
 
 

Related Product Categories
Manufacturing , Processing and Tooling
Cutting Tools
Wide variety of tools for cutting, shaping, and finishing metals and other materials in the manufacturing process.
Materials Processing
Extruding, casting, forging, compacting, heat treating, molding, rolling or other processing machines and components used for metals, polymers or other materials.
Mechanical Components
Industrial Tools
High durability hand tools for industrial assembly, cutting, forming or marking that are often automated or have monitoring capabilities.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise