With its price, its flexibility and a power range of up to 20 Hp, AC Tech SMVector drive excels in environments where inverter technology was once considered too costly, including packaging machinery, food processing machinery, material handling/conveying systems and HVAC systems.

AC Tech SMVector inverter carries all the features required by demanding applications including four modes of operation (V/Hz, Enhanced V/Hz, Vector Speed, and Torque), high starting torque, auto-tuning, advanced low-speed control, and dynamic speed regulation.

http://www.ctiautomation.net/AC-Tech-Drives.htm

Backlash B-Gone! At last, a linear encoder solution with no back-lash or slippage. The NEW TR2 Tru-Trac Accu-Coder Linear Encoder is a versatile solution for tracking velocity, position, or distance in almost any application, featuring an integrated encoder with a rack and pinion gear assembly. Using the Rack and Pinion gear system, encoder readings can be obtained with repeatable positioning, providing excellent accuracy.

Racks can be ordered in varying lengths, and with the accessory spacer block, multiple lengths of rack can be joined for easy installation. Due to the spring loaded torsion arm, which provides simple to adjust torsion load, the TR2 Accu Coder Linear Encoder has all the flexibility and maneuverability of the original TR1 Tru-Trac. It has the ability to be installed in a horizontal, vertical, or upside down position.

http://www.ctiautomation.net/Accu-Coder-Encoders.htm

Lenze 8200 Vector Frequency Drives

• Power range
  • 0.25 kW to 7.5 kW 230 V/240 V (+10 %)
  • 0.55 kW to 90 kW 400 V/500 V (+10 %)
• Overload capacity 180% rated torque for 60 seconds from 15 kW upwards, additional 210 % rated torque for 3 seconds
• Operating modes: V/f linear, V/f quadratic, vector control, torque selection
• Chopper frequency 1, 2, 4, 8, 16 kHz
• Output frequency up to 650 Hz
• Up to 2 analog inputs, bipolar as an option (0-10 V, -10 V to +10 V, 0-20 mA, 4-20 mA; resolution 10 bits)
• Short-circuit-proof, earth-fault-proof during operation
• RS232/485 serial interfaces, optical fibre version available as an option

http://www.ctiautomation.net/Lenze-Frequency-Inverters.htm

Saginaw Control & Engineering's Operator Systems Enclosures are designed for electronic controls and instruments. Equipment can be mounted on the sloping control panel door. Interior components mount to stationary panels. Provides protection from dirt, oil, dust and water.

Construction

• 0.075 In. carbon steel
• Sloping control panel attached with continuous hinge on bottom edge. Door opens to 90º
• Black zinc die cast keylocking/padlocking handle
• 3 point latching mechanism
• Seams continuously welded and ground smooth
• Oil-resistant gasket on door
• Interior print pocket
• Optional back and side panels are mounted on collar studs
• Removable eyebolts
• Ground stud on door
• Concealed hinge

Saginaw Operator Interface Enclosures come in ANSI-61 high solids recoatable gray finish over phosphatized surfaces. Optional panels are powder coated white epoxy polyester. Saginaw Operator System Enclosures support the following industry protection standards NEMA Type 12 & Type 13, UL Listed Type 12, CSA Type 12, and IEC 60529 IP 55.

http://www.ctiautomation.net/Saginaw-Enclosures.htm