The new, highly efficient DCH3 series features a cable-less output in a compact, slim width wallmount design. The DCH3 series produces 3 watt power and is available in multiple ac plug configurations. The DCH3 series may be used for a broad range of applications and for most country models, does not block the adjacent AC outlets.

The all new LPT100-M power supplies are triple output that feature both ITE and non-patient contact and non-patient critical medical safety approvals. These power supplies are compact open-frame design; measuring just 2 x 4 inches, with a height of only 1.28 inches, typical full load efficiency of 82 percent and a power density in excess of 12 watts per cubic inch. The supply is primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and nonpatient critical use in low power medical, dental and laboratory applications.

The iMP Series is a configurable power supply with up to 1,500 watts output capability, and can monitor and control many attributes of the power supply via I2C. The series offers 5 types of modules, including single, dual and triple output units, with individual power outputs of up to 750 watts. The iMP series offers 25 standard output voltages, from 2 Vdc to 60 Vdc, and can provide up to 21 outputs in one package.

The LGA C Series is a high density, non-isolated board-mount power converters for space sensitive applications. LGA C Series power converters offer users a cost-effective, surface-mount power solution capable of delivering 15-100W of scalable power via a low profile land grid array package.

LGA C Series power converters are packaged in a 16.26 x 16.26 mm outline and utilize an identical footprint for all models (3A, 6A, 10A and 20A) to provide designers with a convenient power migration path if system requirements change. Input voltage ratings range from 3.0 to 13.8 VDC (4.5V to 13.8 VDC for the 20A model), making the power converters compatible with a variety of input bus voltages. The power converters also feature a wide adjustable output range from 0.59 to 5.1 VDC through external resistor trimming, reducing the number of module types needed to support multiple applications.