engineering fundamentals SCS Steel Surface Treatment

SCS Steel Surface Treatment
Company
Profile

SCS steel surface treatment transforms ordinary hot band strip steel into a smooth, polished and remarkably clean sheet of steel optimized for fabrication. This patented process removes rust and mill scale and actually prevents the material from rusting again as long as it is stored in indoor, noncondensing environment.

Products

SCS surface treatment is environmentally friendly, using only ordinary water, which is even filtered and recirculated during the process. Compare that with acid pickling, which uses vats of hydrochloric acid and burns siginificant amounts of natural gas.

To understand the environmental advantages of the SCS stell surface treatment, visit http://www.scsprocess.com

Contact Uriah Jessup
Address
Country United States
Telephone 905 388-1915
Email doctorsteel15@yahoo.co.uk
Website www.scsprocess.com/steelprocessing/scs-steel-surface-treatment.html
 Showcase Products
 

click image to enlarge.
SCS Steel Surface Cleaning

The SCS process is a surface cleaning and polishing process for strip steel.  The material can be fed as either coil , sheet or plate. All grime, oil, mill scale and rust is removed, leaving a 'white glove clean' surface that is exceptionally smooth.

-Manufacturing , Processing and Tooling > Cleaning and Surface Preparation
-Manufacturing , Processing and Tooling > Coating, Plating and Painting
-Manufacturing , Processing and Tooling > Materials Processing
 

click image to enlarge.
SCS Removes Rust from Sheet Steel and Resists Further Corrosion

The most amazing proerty of SCS processed steel is its ability to resist rusting without protective oil or coatings. After ordinary hot band has been SCS processed, existing rust is removed and it WILL NOT RUST again if stored in a dry indoor environment.

-Manufacturing , Processing and Tooling > Cleaning and Surface Preparation
-Manufacturing , Processing and Tooling > Grinding and Finishing, Abrasives
-Manufacturing , Processing and Tooling > Materials Processing
 

click image to enlarge.
SCS Surface Treated Steel in Sheet Form

SCS carbon steel sheet or plate is used by small job shops and major fabricators alike to make a wide variety of steel products more economically, with better quallity, than ever before. SCS in sheet or plate form is prized because it laser cuts and plasma cuts faster than hot band or HRPO: 15 -25% increases are common.

-Manufacturing , Processing and Tooling > Materials Processing
-Materials, Chemicals and Adhesives > Metals and Alloys
-Materials, Chemicals and Adhesives > Stock Fabricated Materials and Components
 

click image to enlarge.
SCS Strip Steel in Coil Form

Using SCS steel strip (coil) is a allows rollformers or tube and pipe producers to deliver a better end product at lower cost. Not only is SCS strip smooth, clean, oil-free and rust resistant, the SCS process can make dramatic improvements in the shape of problem coils. SCS flat rolled steel in strip/coil form coils is very popular among steel service centers. Why? Coils offer flexibility to slit, blank and further fabricate the material, adding more value to the SCS.

-Manufacturing , Processing and Tooling > Cleaning and Surface Preparation
-Materials, Chemicals and Adhesives > Metals and Alloys
-Materials, Chemicals and Adhesives > Stock Fabricated Materials and Components
 

click image to enlarge.
SCS Surface Treatment for Flat Rolled Steel Sheet and Plate

SCS is a  mechanical brushing surface treatment applied to flat rolled steel that improves hot rolled black strip, making it a better base material for manufacturing. This environmentally-friendly process gives hot band sheets or coils a clean, rust-resistant ‘cold rolled’ surface ready for fabrication or painting. SCS-processed steel gives manufacturers advantages in cost, quality, environmental impact and procees cycle time for making fabricated products.

-Manufacturing , Processing and Tooling > Cleaning and Surface Preparation
-Manufacturing , Processing and Tooling > Coating, Plating and Painting
-Manufacturing , Processing and Tooling > Grinding and Finishing, Abrasives
 
 

Related Product Categories
Manufacturing , Processing and Tooling
Cleaning and Surface Preparation
Equipment and supplies used to refine or roughen a surface to meet surface finish requirements or to clean, strengthen or prepare the surface for additional processing.
Grinding and Finishing, Abrasives
Equipment and products used for abrading , smoothing, or polishing.
Materials Processing
Extruding, casting, forging, compacting, heat treating, molding, rolling or other processing machines and components used for metals, polymers or other materials.
Materials, Chemicals and Adhesives
Metals and Alloys
Any of various opaque, fusible, ductile, and typically lustrous substances that are good conductors of electricity and heat, form cations by loss of electrons, and yield basic oxides and hydroxides.
Stock Fabricated Materials and Components
Stock materials such as wire rope, fabrics, stock extrusions, strip, bar or sheet materials.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise