Our C41 series forging hammer is mainly used to free forging, drawing, upsetting, puching, hot shearing, forged

welding, bending, torsion and foetal, standard forge. And the one piece forging hammer and two piece forging

hammer are assembled and test drived before it leave factory.
Applications: Pneumatic Forging Hammer are widely used for general Forging Works in blacksmithing, such as

drawing-out, upsetting, punching, chiseling, forged welding, bending and twisting. It is also used for loose tooling

forge.
Features:
+ Integrated one piece resin sand casting machine body, durable and aesthetic feeling inspiring your blacksmithing

creativity.
+ Easy operation, the machine can be operated by hand as well as by foot, a special foot lever was designed to

make foot operation more comfortable and efficient.
+ A plate was mounted at the operating handle showing every actions of ram while hammering.
+ A special oil-box was provided for lubricating the cylinders. Prior to starting the hammer, turn the hand-crank on

the oil box to get a pre-lubrication.
+ Steel base can be supplied together with the hammer on customer requirements, hammer, motor, motor cover …..

every part was installed on the steel base, you can take the hammer anywhere you want, especially for an artistic

blacksmithing show.
+ Special dies are procurable on order, good helper in creation.

Hydraulic forging hammer is a new energy saving and environmental protection forging hammer.It can save more

than 90% energy comparing with the steam forging hammer and the forging hammer with compressor. Also,it can

improve the working condition.
+Hydraulic forging hammers have two types: hydraulic free forging hammer and hydraulic die forging hammer. and

hydraulic free forging hammers also have two types: one is double arm hammer ,the other is single arm hammer.

Our factory can produce D51, D52, D53K series and over 40 specs ring rolling machine conforming to national

standard, all economic and technical indexes conform to national standard. Moreover, it is used widely for thermal

rolling of loop parts and components for bearing, auto gear wheel and flange disc industry. Roughcast of parts

produced with ring rolling produced by our factory can save labor and materials and have high precision winning

high reputation among domestic and foreign users.
D51A and D51B ring rolling machines have been widely used for ring like semifinished of bearing forging auto-gear

& flange. D52 series of Radial ring rolling machine is contrlled by PLC,the end of ring is not rolleded.When rolling to

adopt open roll or close roll.The dimension of ring is displayed on the digital-displaymeter. D53K series of Radial

and Axial Ring Rolling machine,to adopt CNC technology to roll the ring by radial and axial together.Only to enter

the dimensions of rinf,semifinished ring,toll and material specification,then it can be rolled automaticlly.The size of

ring and status of machine will be displayed on CRT.

The product is used in precision forging and multiple mould forging of all kinds of accessories.
 Performance:
+ Hit energy controled by digitization ,you can set it at will
+ The hit frequency is high,the hammer head return fast and no close die phenomena.
+ The control system show chinese word,so people can communicate with the machine.
+ The fault diagnosis system can diagnose the machine automated ,this can reduce the analysis of failure reason.
+ The U-Frame and cast steel machine body entirety.
+ We can supply vibration isolation device composed by spring vibration isolation and viscous damping according to

the customer's requiement ,this remove the vibration produced in the working.
+ The X type guide rail structure ensurd the good guide and the precision of forgings.
+ The hydraulic liftout device ensured the reliability and stability of mold stripping.
9.
It is mainly used in all kinds of industry with riveting parts,such as automobiles and trams etc?equiped with

suitable apparatus,it can be used to punch,pressing-set etc

This series forging manipulator has whole hydraulic press and mechanism hydraulic press mixed etc drive types.It

has manipulator walk,clamp pinch,the clamp head rotate.the clamp hold lifting,the clamp hold slant ,clamp hold turn

back etc functions.It used to clamp axes kinds forged piece and blan k to cooperate with forging hammer to do

forging work ,to reduce labour intensity of workers.to come true manufacturing mechanization of forged piece.