engineering fundamentals Hebei Anping No.1 Welded Mesh Panels Factory

Hebei Anping No.1 Welded Mesh Panels Factory
Company
Profile

 

Anping No.1 Welded Mesh Panels Factory which is located in Chinese Mesh and Netting CountyAnping which is professionally engaged in the production and sale of all kinds of meshes and nettings. Our corporation has gotten the believes and supports of clients at home and abroad since it was founded over ten years ago ."Providing the fine mesh and netting, creating the famous brand of the line" is our invariable aim.

 

Our company has owned all kinds of weaving netting machines of over 160 sets and staff members of over 100 at present and developed metal wire mesh products of "NO.1" brand series through the management and development of many years.

 

We have become the famous brand of Chinese metal wire mesh and one of the largest exporters in Chinese mesh and netting circle . Our products sell well to more than 30 provinces in China and also export to Europe, America, East Asia, South Asia, Middle East and Africa etc more than 20 countries and regions.

 

Our company is mainly engaged in the production and sale of mesh and netting products including the General Welded Wire Mesh Panels, Reinforcing Mesh, Floor Heating Mesh, Pvc Coated Welded Mesh Panel, Stainless Steel Wire Mesh Panels, Galvanized Wire Mesh Panels, Wire Fence Panels, Pvc Coated Welded Mesh and Stainless Steel Welded Mesh. We'll build and develop the co-operation relations of new and old friends at home and abroad continuously for  No.1 Welded Mesh Panels being deeply remembered by users by our multifunction and all-sided service system.

 

You may refer to the introduction of the following about the main item and the detailed data of products.

 

Products

Here is the welded wire mesh panel supplier and exporter. Series products include galvanized welded panel, stainless steel welded wire fence, concrete reinforcing meshes.

Contact jingjing Miao
Address Heibei Anping County, Hebei province, China. 053600
Country China
Telephone 86-318-5821607
Fax 86-318-5821607
Email info@weldedwiremeshpanel.com
Website www.weldedwiremeshpanel.com/
 Showcase Products
 

click image to enlarge.
3D Panel

 

3D panel is a new wire mesh products, mainly used in construction. It's high tensile and is easy to install and these features make 3d wire mesh panels very popular by world construction customers.

 

3d Panel also called double layer Welded Wire Panel, using welding method joining two pieces of welded wire panel together. Mainly used as for construction. The side panel mesh is commonly 2" opening with 11 or 12 gauge wire, surface with galvanized wire panel or hot dip galvanized wire panel. Inserted EPS size is 2", 2.5" and 4".

 

Components of the installed panel include:

Foam core for insulation. 

Wire mesh on inside and outside. 

Welded truss of wire cross pieces. 

Sprayed concrete on both sides ("shotcrete").

 

Benefits of 3D Panel: Thermal Insulation, Fireproofing, Moisture proofing , Soundproofing, Lightweight , Economical Efficiency , Shortening of Construction Time.

 

3D panel uses: These panels are 4 feet wide and come in almost any length. They can be used for the walls, roof, floor, and so on.

 

-Materials, Chemicals and Adhesives > Metals and Alloys
 

click image to enlarge.
Wire Fence Panel

 

Wire Fence Panel can be made of superior quality welded mesh, electro galvanized, hot-dipped galvanized or plastic coated. It is also supplied in plain steel without galvanizing to save cost.

 

The wire fabric is made up of steel wires arranged in parallel fashion in two orthogonal directions, with the points of contact being welded between the wires by electrical welding process (spot welding) by welding machine.

 

The raw material for the manufacture of panels is the wire through cold rolling or by wire drawing using the hot-rolled wire produced in the steelworks.

 

Wire Fence Panel have the features of corrosion resistance, aging resistance, sunlight resistance and weather resistance.

 

The Panels are determined by several data:

 

Wire Diameter;

Surface Treatment;

Tensile Breaking Strength;

Elongation;

Panel Length and Width

 

Some Standard Panel Sizes:

1.5mm Wire Diameter, 1/2" X 1/2" Mesh Opening;

2mm Wire Diameter, 1" X 1" Mesh Opening;

3mm Wire Diameter, 1" X 1" Mesh Opening;

3mm Wire Diameter, 1-1/4" X 1-1/4" Mesh Opening;

4mm Wire Diameter, 1-1/2" X 1-1/2" Mesh Opening;

2mm Wire Diameter, 2" X 2" Mesh Opening;

3mm Wire Diameter, 2" X 2" Mesh Opening;

4mm Wire Diameter, 2" X 2" Mesh Opening;

5mm Wire Diameter, 2" X 2" Mesh Opening;

6mm Wire Diameter, 4" X 2" Mesh Opening;

Special sizes can be custom made.

 

Applications: Welded steel bar grating panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.

 

 

Wire Fence Panel are utilized as guards in buildings and factories, as animal enclosure and fence in agriculture; it is also used in horticulture industry as tree guards, plant protection.

 

-Materials, Chemicals and Adhesives > Metals and Alloys
 

click image to enlarge.
Reinforcing Mesh

 

Reinforcing Mesh is used for the reinforcement of concrete, is manufactured to SANS 1024:2006 and to other international standard specifications.

 

Features

 

Reinforcing Mesh mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction and concrete surface beds. Other designed applications include: 

Retaining and shear walls

Beams and columns

Concrete paving overlays

Precast concrete elements

Suspended floor slabs

Swimming pool and gunite construction

Reinforcing Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements

Reinforcing Mesh reinforcement considerably reduces construction time

SANS 1024:2006 designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape codes. (The reference is the nominal mass of the fabric in kg/m2 x 100).

The cold-rolled deformed wire used in welded mesh fabric has a characteristic strength (0.2% proof stress) a minimum of 485MPa compared to 450MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of up to 8%.

Important design criteria

 

Placing of Fabric

In order to obtain the best results when using fabric reinforcement, special care must be taken to ensure that the mesh is positioned and maintained at the correct depth after the concrete pour. This can be done by using stools or plastic or concrete spacers. Another option is to place the fabric on poured concrete that has been leveled to the desired reinforcement depth. After placing the mesh the concrete can be topped up to the specified overall slab thickness.

Ideally fabric must be located 50mm from the top of the slab and where bottom steel is required,, it must also be supported 50mm above the substrate.

 

Lapping of Fabric Mats

It is recommended that in calculating the lap requirement for surface bed welded mesh fabric reinforcement that the formula shall be 25 x diameter + 150mm or 300mm, whichever is the greatest.

 

Quality

The Reinforcing Mesh is manufactured under strict quality controls with all standards conforming to SANS 1024:2006 standard specifications and tolerances and carries the certification mark.

 

 

 

-Materials, Chemicals and Adhesives > Metals and Alloys
 

click image to enlarge.
Live Animal Traps

Live animal traps are a common product of the Welded Wire Mesh. As supplier and manufacturer of live animal raps, we can varieties of this cages including raccoon traps, squirrel traps, chipmunk traps, skunk traps, coyote traps, fox traps, mink traps, mouse traps, etc. We can manufacture live animal traps according to customers' designs and requirements.

 

The traps are made by metal wire and sheet, the finish coating include electro-galvanized, Hot Dipped, powder coated etc, the coating types are depend on clients' preference. We can produce as per customers' designs and samples.

 

Cage Trap Features:

1) Pre-assembled and ready to use

2) Powder coated for longer life

3) Gravity action door with spring loaded latch

4) This cage is durable 

5) Shielded handle for safe moving of trap

6) Easy to bait, set and release

7) Double meshed around bait area to prevent tripping from outside the trap

8) Live animal trap of Galvanized Welded Wire Mesh offers safely capture troublesome pests without injury.

 

Varieties of Live Animal Cage Traps:

Foot pallet Cage Trap available in 16"X6"X6", 17.6"X6.6"X6.6" 19.2"X7.2"X7.2". 

Made of Iron wire. Finishes: Galvanized

 

Single Door Cage Trap available in 18"X6 "X6", 54"X18"X18", 72"X24"X24".

Made of Iron wire Galvanized.

 

Pothook Cage Trap available in 11"X4"X4", 33"X14"X14", 33"X28"X28".

Made of Iron wire Galvanized.

 

Ranger Raccoon Traps For Trapping Raccoon

The Raccoon professional cage trap is very durable.

Sizes and Description:30" x 12" x 11". 

Galvanized wire mesh, steel reinforcements. Professional model, one spring-loaded door

 

Application:

For trapping of various animals including dog, cat, raccoon, mouse, rats, squirrels, pigeons, foxes and other live animals.

-Materials, Chemicals and Adhesives > Metals and Alloys
 

click image to enlarge.
Welding Bird Cages

We can serve variety of Live Animal Traps for the majority of customers. Include bird cage, dog cage, and the other animal cages. You definitely want to find a comfortable environment for your pet. We can design the cage according to the pet feather or size even feeding.

 

Bird cages made of welded wire have flat form, uniform opening and beautiful outlook. It is used for fencing birds and small animals, etc.

 

Welding Wire bird cages Materials:

* Galvanized iron;

* Plastic coated;

* Stainless Steel.

 

Sizes and treatment: 

According to your specific requirements

 

Can provide three ranges sizes:

* Small size: 18L x 24W x 18H inches

* Medium size: Medium sized birds need cages that are a very minimum of 24L x 24W x 24H with bar spacing between .50 to .75 inch.

* Large size: Minimum birdcage size of 36L x 36W x 48H with 1 to 1.5-inch spacing between the bars.

Notes: L-length, W-width, H-high.

-Materials, Chemicals and Adhesives > Metals and Alloys
 
 

Related Product Categories
Materials, Chemicals and Adhesives
Metals and Alloys
Any of various opaque, fusible, ductile, and typically lustrous substances that are good conductors of electricity and heat, form cations by loss of electrons, and yield basic oxides and hydroxides.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise