engineering fundamentals Beton Mesh Reinforcing

Beton Mesh Reinforcing
Company
Profile

 

Beton Mesh Reinforcing is a leading manufacturer of reinforcing mesh, as well as a supplier of concrete reinforcing wire products. Beton Mesh Reinforcing is recognized in the concrete reinforcement market with a reputation for quality products, as well as for a highly professional and superior service.

 

We can supply the following products: Reinforcing Welded Mesh, Trench Mesh, Slab Mesh, Brick Wall Reinforcement Mesh, Rib Mesh, Ladder Mesh and Truss Mesh, Pipe-Line Reinforced Mesh, Bar Chair, Bar Supports and Reinforcement Spacers, Reinforcement Tie Wire.

 

Products

Reinforcing Welded Mesh, Trench Mesh, Rib Mesh, Bar Chair and Reinforcing Tie Wire

Contact ning shen
Address Renmin road, Anping, Hebei, China
Country China
Telephone +86-318-5821607
Fax +86-318-5821607
Email info@reinforcingmesh.org
Website www.reinforcingmesh.org
 Showcase Products
 

click image to enlarge.
Beam Bolster

Beam Bolster is used to support lower beam steel from the slab form. All legs spaced 2-1/2" on centers. It is available in 3/4" to 5" heights in 5'-0" lengths. Beam Bolster Upper Beam Bolster upper is used to support successive layers of steel one above the other. Legs spaced 2-1/2" on centers in standard 5'-0" lengths. Beam Bolster with Plate Beam Bolster with Plate is used to support heavy bottom steel on soft material. Details are same as for standard beam bolster with the addition of a bearing plate. Its length is 5'-0" only.

-Manufacturing , Processing and Tooling > Milling
 

click image to enlarge.
Brick Wall Reinforcement Mesh

 

Brick Wall Reinforcement Mesh is welded wire sheet for reinforced concrete construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface.

Wire Diameter: 2.5-6.0 mm
Width: 5cm-27cm
Length: 3mm.
Spacing: 40cm
Surface Treatment: Welded after hot dipped galvanized, Welded after electro galvanized, Welded before electro galvanized, Welded before hot dipped galvanized, Welded by stainless steel wire.

We have two types of Brick Wall Reinforcement Mesh: truss-mesh reinforcement, ladder-mesh reinforcement.
Package: carton/pallet/plastic wrapped.

 

-Motion Control > Magnets
 

click image to enlarge.
Concrete Reinforcing Mesh

 

Reinforcement mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square reinforcement mesh grid pattern and is produced in flat sheets. Reinforcement Mesh sheets are usually 6m long x 2.4m wide as standard.

Concrete Reinforcing Mesh is superior quality Welded Wire Mesh Panels with flat even surface, firm structure. This Welded Wire Mesh Panel offers flat even surface and firm structure. It can be used extensively in building, food, agriculture, and serve in construction and fencing applications.

We offer three types of concrete reinforcing meshes: Welded Stainless Steel Wire Mesh Panels, Galvanized Welded Mesh Panels, and Hot-dip Zinc Plating Welded Mesh Panels. The reinforcing mesh length does not limit.

Concrete Reinforcing Mesh Applications: Industrial, Manufacturing, Guarding, Security, Enclosures, Large Animal Enclosures, Quarantine Caging, Fencing and Gabions.

Concrete Reinforcing MeshConcrete Reinforcing Mesh

 

-Motion Control > Magnets
 

click image to enlarge.
Concrete Slab Mesh

 

Concrete Slab Mesh is Reinforced welded wire mesh panels. This reinforced welded wire mesh panels are made of galvanized welded wire mesh for constructional uses. For example, block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement.

It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Variety: Truss Mesh Reinforcement.
               Ladder Mesh Reinforcement.
Available Material: hot dipped galvanized, electro galvanized or stainless steel.

Concrete Slab MeshConcrete Slab Mesh

 

-Materials, Chemicals and Adhesives > Magnets
 

click image to enlarge.
Concrete Wire Mesh

The longitudinal and transverse reinforcement bars are welded into concrete wire mesh. The concrete meshes have a more dense spacing of the steel bar. Concrete wire mesh is also named welded steel fabric.

Application: concrete wire mesh is used for coal mine tunnel network protection or reinforcement, concrete pavement, bridge deck pavement, airport runway, tunnel lining, housing floor, roof, wall, floor, concrete pipes and so on.

Advantages: concrete wire mesh for a new, efficient and high-quality steel reinforced concrete structures can be reinforced to reduce the installation of a large number of working hours, less than banding employment nearly approached net 50% - 70%. Concrete wire mesh can help to prevent the emergence of concrete cracks and development, roads, floors, Floor welding network configuration can reduce the surface of concrete about 75 percent split.

-Materials, Chemicals and Adhesives > Magnets
 
 

Related Product Categories
Motion Control
Magnets
A magnet is simply any material capable of attracting iron and producing a magnetic field outside itself, either naturally or induced.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise