engineering fundamentals Recon Test Equipment Inc

Recon Test Equipment Inc
Company
Profile

Recon Test Equipment Inc. has a commitment to its customers to truly be their "sole source" for all your reconditioned test equipment needs. Whether your requirement is to purchase, rent, lease, sell, trade, repair or calibrate, Recon Test is there for you before, during and after each transaction. We are grateful for each and every opportunity that our customers provide and we treat you accordingly. Please pick up the phone and call with any questions or requirements you have.

Contact Louis Amabile
Address 810 Waterway Place Suite 1000
Longwood, FL 32750
Country United States
Telephone 866-855-0960
Fax 866-855-4288
Email hnager@recontest.com
Website www.recontest.com
 Showcase Products
 

click image to enlarge.
Agilent-HP 8720D Microwave Vector Network Analyzer

The HP 8720D is a high performance vector network analyzer for laboratory or production measurements of reflection and transmission parameters. It integrates a high resolution synthesized RF source, an S-parameter test set, and a four-channel three-input receiver to measure and display magnitude, phase, and group delay responses of active and passive RF networks.

Two independent primary channels, two auxiliary channels, and a large screen color display show the measured results of one or all channels, in Cartesian or polar/Smith chart formats.

Features:

  • 50 MHz to 13.5, 20, or 40 GHz frequency coverage
  • New processor makes measurements and data transfers up to seven times faster
  • Fast-sweeping, built-in synthesized source
  • Integrated solid-state switching S-parameter test set
  • Vector receiver, error correction, time domain
  • Up to 105 dB dynamic range
-Test and Measurement > Analytical Instruments
-Test and Measurement > Electrical Testing Equipment
-Test and Measurement > Non-destructive Testing Equipment
 

click image to enlarge.
Anritsu 37369A Vector Network Analyzer

The Anritsu 37369A 40 MHz to 40 GHz network analyzer integrates a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.

Features:

  • 40 MHz to 40 GHz
  • Fast Sweeping Synthesized Source
  • Auto Reversing Test Set; Solid-State Transfer Switch;
  • Four Independent Displays
  • Four Channel Receiver
  • Internal Hard and Floppy Disk Drives
  • LRL/LRM Calibration
  • Adapter Removal Calibrations
  • Fast Measurement Throughput via GPIB
-Scientific Instruments > Analytical Instruments
-Scientific Instruments > Test Equipment
-Test and Measurement > General Test Equipment
 

click image to enlarge.
Agilent DSO80804B 8 GHz Infiniium High Performance Oscilloscope

Agilent DSO80804B 8 GHz Infiniium High Performance Oscilloscope

The Agilent Technologies Infiniium 80000B Series and InfiniiMax II probing system will lead to improved measurements and increased design margins. The signal integrity advantages of the Agilent Infiniium 80000B Series Scopes and InfiniiMax Probing System include the lowest noise floor, lowest jitter measurement floor, lowest trigger jitter, and flattest combined frequency response of scope and probe in the industry. Superior signal integrity maximizes engineer design margins by not wasting any measurement accuracy due to the poor noise, jitter, or frequency response of the scope or probing system.

  • 8 GHz bandwidth real-time oscilloscope with up to 40 G
-Scientific Instruments > Test Equipment
-Test and Measurement > Analytical Instruments
-Test and Measurement > General Test Equipment
 

click image to enlarge.
Agilent E5070B 300 kHz to 3GHz RF Network Analyzer

Agilent E5070B 300kHz - 3GHz RF Network Analyzer.

 

The E5070B advanced usability such as 10.4 inch LCD, touch screen, built-in Microsoft Visual Basic for Application (VBA), and 2 and 4-port electronic calibration (ECal) increases your productivity. The LAN connectivity, in addition to GPIB, offers an easy connection to your PC environment. Built-in 2, 3, and 4 test ports provide simultaneous measurement of all signal paths for components with up to four ports. This advanced architecture minimizes the number of sweeps to complete a multiport measurement and further improves test throughput. The combination of the 4-port E5070B and the E5091A multiport test set offers a test solution for up to 9 ports (or up to 14 ports with two E5091A test sets), and is tailored for testing multiport wireless components such as handset front end modules. The E5070B provides built-in balanced measurement capability, which enables you to test balanced components such as SAW filters, differential amplifiers, and high-speed digital cables/connectors. It provides mixed-mode S-parameter measurements with a fixture simulator function that includes matching circuit embedding, test fixture de-embedding, and impedance conversion capabilities.

  • 300 kHz to 3 GHz 125 dB dynamic range at test port (typical)
  • 9.6 µs/point sweep speed
  • 0.001 dB rms trace noise
  • Integrated 2-, 3- and 4-ports with balanced measurements
  • Fixture embedding/de-embedding and port characteristic impedance conversion
  • Time domain transform with gating
  • Built-in Visual Basic for Applications (VBA)
-Scientific Instruments > Test Equipment
-Test and Measurement > Analytical Instruments
-Test and Measurement > General Test Equipment
 

click image to enlarge.
Rohde & Schwarz SMATE200A Signal Generators

Rohde & Schwarz SMATE200A 6GHz Vector Signal Generators

The R&S SMATE200A is based on the successful R&S SMU200A but is specifically designed to meet production requirements. It comes without a display or keys on the front panel, and its connectors are located at the rear. In addition, it is optimized for faster setting times in order to reduce test time.

  • Very short setting times for frequency and level (<3 ms) In List mode, setting time reduced down to <400 µs through use of predefined frequency and level values
  • Flexibly addressable Fast Hop mode with setting times same as in List mode
  • Multisegment waveform function enables fast switching between different test signals in baseband
  • Electronic attenuator for entire frequency and level range
  • Status LEDs on front, connectors on rear†
  • Very low SSB phase noise of typ. 135 dBc, or typ. 140 dBc with the Low Phase Noise option (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)
  • Wideband noise of typ. 153 dBc (>5 MHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)
  • High output power of typ. +26 dBm with High-Power Output option
  • Very high level repeatability of typ. 0.05 dB
  • I/Q modulator with 200 MHz system bandwidth
  • Excellent ACLR performance of typ. +70 dB with 3GPP FDD†
  • Up to two complete independent signal generators in one unit
  • Choice of 3 GHz and 6 GHz frequency options in both paths
  • Up to two independent baseband sources that not only support realtime signal generation but also offer arbitrary waveform generation with up to 64 Msamples each†
  • Digital Standard Eutra/LTE available
  • Remote-controllable via LAN (Gigabit Ethernet) and GPIB

Options:

  • B10 - Baseband generator with dig. modulation (real time) and ARB (64 M samples)
  • B13 - Baseband main module
  • B31 - High power output for 1st RF path
  • B36 - High power output for 2nd RF path
  • B106 - Frequency range 100 kHz - 6 GHz for 1st RF path
  • B206 - Frequency range 100 kHz - 6 GHz for 2nd RF path
-Electrical and Electronic Components > Electrical Testing Equipment
-Test and Measurement > Analytical Instruments
-Test and Measurement > General Test Equipment
 
 

Related Product Categories
Electrical and Electronic Components
Electrical Testing Equipment
Electrical testing instruments for current leakage and insulation resistance measurements.
Scientific Instruments
Analytical Instruments
A wide classification of instruments that are used to analyze material samples, or their components, and record data specific to the application.
Test Equipment
Instruments used to test, analyze, control, calibrate, display and record data in laboratory and other testing situations.
Test and Measurement
Analytical Instruments
A wide classification of instruments that are used to analyze material samples, or their components, and record data specific to the application.
Electrical Testing Equipment
Electrical testing instruments for current leakage and insulation resistance measurements.
Non-destructive Testing Equipment
Instruments and other devices used in testing methods that examine an object, material, or system without impairing its future usefulness. NDT measurements include flaws, thickness, material condition, corrosion, bulk conductivity and others.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise