FB-D02 Dust-free Automatic Recovery Sandblasting Machine
1. Occasions with high environmental protection requirement
but without dust removal equipment.
2. High processing level.
Suitable for removing rust, cleaning paint, welding treatment,
removing burrs/flashes/oxide skin, matte finishing of stainless
steel/aluminum items, removing dirt on concrete/carving stone
Model: FB-D02 Dust-free Automatic Recovery Sandblasting Machine
Working Power: 380V/50Hz
Air Pressure: 5-7kg/cm2
Gas Consumption: 3m3/min
Motor Power: 4kw
Working Efficiency: 6-10m2
Working Radius: rated 10m, max. 20m
Working Form: Automatic Abrasive Recovery
Clean Level: Sa2-3
Roughness: About 60um
Outer Dimension: 1380×830×1700mm
Sand Material Specifications: Above 20-
1. Technologies introduced from overseas, currently the most
advanced environmental protection sandblasting equipment
in domestic market.
2. Highest processing efficiency among the same type in
3. Combining sandblasting, recycling, circulation, separation
and dust removal, no dust and no pollution.
4. Working environment reaching GB-103328-10333-89 Health
5. Automatic feeding, after putting the sucking head into the
abrasives, the vacuum pump system will feed automatically.
6. Clean level reaches Sa2-3.
7. Multifunctional, combining the advantages of Open Type,
Industrial Sucking Type and Environmental Protection Type.
8. Adopting special control circuit, working pressure
adjustable within 0.2Kpa-0.8Kpa, could meet requirements
of different sandblasting process.