engineering fundamentals HP Power Steering Hose Co., Ltd.

HP Power Steering Hose Co., Ltd.
Company
Profile

 

For different properties, power steering hoses are classified into two types: high pressure and low pressure or return hose.

 

Generally speaking, high pressure hoses are fabricated by CSM. It runs well at successive elevated temperature of 270?, occasionally up to 300?. Due to transferring pressurized fluid, the hose should withstand internal pressure and at the same time pulsation pressure. To fulfill the task, its working pressure should reach 1500 psi. As its harsh working conditions, the power steering pressure hose are manufactured by state-of-art materials - CSM.

 

Contact shenning
Address NO.21 Development zones, Hengshui, Hebei, China
Country China
Telephone +86-318-58976555
Fax +86-318-58976555
Email sales@powersteeringhose.net
Website www.powersteeringhose.net
 Showcase Products
 

click image to enlarge.
Power Steering Pressure Hose

 

Power steering pressure hose is available for air, fuel, methanol, hydraulics and lubricating oils between -55? to +300?.

 

Power steering pressure hose cover is fabricated by polyester which is highly resistant to ozone, heat and oil. Its inner tube made of special synthetic rubber to withstand internal oil temperature up to 300?. Reinforcement, made of high-quality fabric braids, can withstand pulsation pressures 1500 psi. Tube, a special formulation of synthetic rubber makes it excellent resistance to oils, heat and ozone.

 

-Material Handling and Packaging > Manipulators and Lifters
 

click image to enlarge.
High Pressure Power Steering Hose

 

High pressure power steering hose is especially suitable for oils, solvents, lubricate oils and other liquids, for it is lined by Teflon. This material is often used as inner liner for its low coefficient of friction, dielectric properties, high melting temperatures and chemical inertness.

 

Its cover is made of CSM which excels in resisting ozone, heat and oils. Reinforcements is braided by 308 steel for maximize working pressure up to 2500 psi. This power steering hose has a wide range of operating temperature from -50? to 300?.

 

-Material Handling and Packaging > Manipulators and Lifters
 

click image to enlarge.
Power Steering Return Hose

Power steering return hose is used in the return side of automotive power steering systems. Its tube and cover are made of CR, which has a good resistance to ozone, sunlight, heat, oils and aging. The reinforcement uses 2-spiral synthetic rubber providing protection from the outer environment. This construction gives it ability to work at -40? to 250?under working pressure of 250 psi.

-Material Handling and Packaging > Manipulators and Lifters
 

click image to enlarge.
Low Pressure Power Steering Hose

 

Power steering hoses are always in pairs - high pressure and low pressure. One transfers power steering liquid from the pump to the mechanism. While the other transfer liquid back to the pump. Both hoses work together to make the steering system operate.

 

Low pressure power steering hose is especially designed for low operating pressure up to 175 psi. Both tube and cover are made of CPE, which has excellent resistance to ozone, sunlight, heat as well as anti-aging properties. Polyester spiral reinforcement gives the hose better capability of withstanding elevated temperature up to 300?.

 

-Material Handling and Packaging > Manipulators and Lifters
 

click image to enlarge.
Silicone Power Steering Return Hose

Silicone power steering return hose is superior to its opposite number – black rubber hose. At high temperatures, silicone hose still remain flexibility and soft. Over time, it will not crack, perish or leak as the rubber hose does. Hence, silicone hose has tendency to replace conventional rubber hoses in automobile and truck power steering systems.

 

This silicone return hose is reinforced by 3-ply or 4-ply premium polyester and lined by Fluoro. The construction makes it be able to withstand high pressure and temperature.

 

Straight, elbow or other irregularly shaped silicone hoses are at stock.

-Material Handling and Packaging > Manipulators and Lifters
 
 

Related Product Categories
Material Handling and Packaging
Manipulators and Lifters
Industrial manipulators and industrial lifters are used to move and position materials, products, parts, and tools. Commonly used attachments include hooks, magnets, electromagnets, core grips, suction cups, pneumatic clamps and vacuum pads.
 
  Home  About Us  Privacy  Disclaimer  Contact  Advertise