engineering fundamentals Member Info (devitg)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators

Materials

Design

Processes

Units

Formulas

Math
 
Basic Information
UserName: devitg
Name: Gabriel Calos De Vit
Location: CORDOBA ARGENTINA
Occupation Mechanical technician
Specialty: FIXTURES
E-Mail: devitg@gmail.com
 
Profile Summary
No profile summary on file.
 
  

Posts by devitg
[ Order by Time Posted ] [ Group by Topic ] [ Topics by devitg ] [ All Topics ]
Showing Messages 1-30 (of 296)  Next >>
PECVD Chamber
Topic started by eyalgrin on 06/05/17, Message No. 22618
Do Google search    https://www.google.com.ar/search?...
Posted 06/28/17 09:24 PST, Message No. 22642
Proven method in forging industry for counting material parts tra...
Topic started by MSSPL on 05/08/11, Message No. 21435
Weight each kind of part
Posted 06/04/11 19:01 PST, Message No. 21461
boiler unit conversion
Topic started by rarizaga on 09/17/10, Message No. 21220
About  230 HP.   Do a search for a free software cal...
Posted 09/22/10 18:30 PST, Message No. 21222
problem about how to calculate the pressure difference
Topic started by laenkyne on 04/13/10, Message No. 21080
Extend upward the tube, and do a restriction at its end, so it wi...
Posted 04/24/10 08:21 PST, Message No. 21086
Cone drilled on Curved Plate
Topic started by vchev2002 on 08/18/09, Message No. 20724
Please send it to   myusernamehere at gmail.com
Posted 08/23/09 11:07 PST, Message No. 20742
Torispherical Ends
Topic started by ..MP.. on 07/16/09, Message No. 20649
Here are the formula, http://mathworld.wolfram.com/Torispherical...
Posted 07/18/09 09:27 PST, Message No. 20660
Spiral helix in sheet metal
Topic started by randombrad on 07/16/09, Message No. 20648
Find a image copy from an old SHOP book used at most sheet metalw...
Posted 07/18/09 09:43 PST, Message No. 20661
Design Toggle Jack
Topic started by umeshgharat on 01/20/09, Message No. 20258
Seem to be a home work .  
Posted 01/24/09 17:14 PST, Message No. 20280
Definition of current for a three phase circuit.
Topic started by b1ueshift on 06/29/08, Message No. 19860
a 60 amps circuit breaker can handle 60 amp at each phase , it wi...
Posted 07/05/08 17:00 PST, Message No. 19872
Rated amps , are for each phase .  
Posted 07/05/08 15:09 PST, Message No. 19870
Formula for Flow Rate
Topic started by fuad123 on 06/18/08, Message No. 19834
There is no relation between Pressure  and FLOW . No up...
Posted 06/18/08 17:35 PST, Message No. 19837
glass blowing
Topic started by rakhshanda on 06/05/08, Message No. 19804
ont forget the HOLY GOOGLE http://www.google.com.ar/search?q...
Posted 06/05/08 18:55 PST, Message No. 19805
Pre-hard machinable steel with highest compressive yield strength
Topic started by john2005 on 05/31/08, Message No. 19792
Can I ask what is the application ?Machinable  with what mac...
Posted 06/01/08 07:50 PST, Message No. 19793
Thread identification
Topic started by dwhurst on 05/21/08, Message No. 19753
it ia a MA 4 x 0.70 step In metric we sizes thread by diamet...
Posted 05/22/08 10:45 PST, Message No. 19757
Electrical compressor wanted, low flow, to around 400 bar
Topic started by gbynum on 05/02/08, Message No. 19719
Final work is charging the accumulator. Ok , it is clear.&nb...
Posted 05/06/08 11:29 PST, Message No. 19723
How small is the flow to handle.?Will you start from atmosphere o...
Posted 05/03/08 10:10 PST, Message No. 19721
Brake System Doubts
Topic started by akshaymit on 03/25/08, Message No. 19618
after going to Google  http://www.google.com.ar/search?q=Ped...
Posted 04/05/08 06:28 PST, Message No. 19651
Valve Torque Calculation
Topic started by nagarajana on 02/29/08, Message No. 19541
Not sure , but this value is calc at the manufacturer plant by ap...
Posted 03/02/08 17:30 PST, Message No. 19543
Buoyancy Calculations
Topic started by jpconner on 02/29/08, Message No. 19540
see here  http://www.pbs.org/wgbh/nova/lasalle/buoybasics.ht...
Posted 03/02/08 17:33 PST, Message No. 19544
Second Moment of Area for I-section with curved Flange
Topic started by JackPatrick on 02/24/08, Message No. 19528
to upload a file , no matter where you are , use www.yousend...
Posted 03/02/08 17:35 PST, Message No. 19545
material
Topic started by wubaia on 10/07/07, Message No. 19191
B 0.15~0.4 0.6 , Seem to be AISI 4130A 0.25~0...
Posted 10/20/07 03:54 PST, Message No. 19217
PULLEY STUFF
Topic started by cessna on 09/28/07, Message No. 19157
Hi , yes I made a Mistake , if you rise the rod 2 inch it will up...
Posted 09/30/07 08:04 PST, Message No. 19164
 just 2  inch , guess the pulley has diameter 0 , if yo...
Posted 09/29/07 11:03 PST, Message No. 19159
Spring design.
Topic started by gigidili on 09/26/07, Message No. 19139
See here http://www.engineersedge.com/beam_bending/beam_bend...
Posted 09/29/07 11:11 PST, Message No. 19160
Steel Grade
Topic started by kibhav on 09/21/07, Message No. 19125
 B , in steels means BORON , or BORO in spanish , added at 0...
Posted 09/26/07 19:43 PST, Message No. 19141
scissor lift calculations
Topic started by master1000 on 10/07/06, Message No. 18022
Sorry to say , that info is not enough to do anything, do you hav...
Posted 10/16/06 15:29 PST, Message No. 18040
give us or you the lenght of all the element .no numbers , no ans...
Posted 10/07/06 11:15 PST, Message No. 18023
Old motor efficiencies
Topic started by proceng on 10/06/06, Message No. 18019
no data , no answer
Posted 10/07/06 11:16 PST, Message No. 18024
Spring Rates
Topic started by Screamn03 on 08/18/06, Message No. 17903
Yes, it is rigth. 1 Newton = 0.2248089 lbs25.4 mm = 1 Inchso...
Posted 08/21/06 16:20 PST, Message No. 17909
Yes, it is rigth. 1 Newton = 0.2248089 lbs25.4 mm = 1 Inchso...
Posted 08/21/06 16:20 PST, Message No. 17908
Showing Messages 1-30 (of 296)  Next >>

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2017 eFunda, Inc.