engineering fundamentals Member Info (devitg)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators






Basic Information
UserName: devitg
Name: Gabriel Calos De Vit
Occupation Mechanical technician
Specialty: FIXTURES
Profile Summary
No profile summary on file.

Posts by devitg
[ Order by Time Posted ] [ Group by Topic ] [ Topics by devitg ] [ All Topics ]
<< back  Showing Messages 31-60 (of 296)  Next >>
friction factor
Topic started by dejair on 07/16/06, Message No. 17833
Over what surface???
Posted 07/18/06 09:23 PST, Message No. 17835
Sheet metal
Topic started by maniac on 07/04/06, Message No. 17800
Posted 07/06/06 16:58 PST, Message No. 17807
Request for advice regarding manufacture of a spring anchor (with...
Topic started by john2005 on 07/02/06, Message No. 17790
Posted 07/06/06 17:28 PST, Message No. 17808
Planetray gearing
Topic started by James McDaniel on 06/12/06, Message No. 17713
Hi, you can upload your PDF to , and put here t...
Posted 06/27/06 18:53 PST, Message No. 17763
seeking creative engineers with a desire to TEACH!
Topic started by lodaya on 05/23/06, Message No. 17661
please see here
Posted 05/30/06 13:28 PST, Message No. 17679
Removing moisture from closed-loop system
Topic started by 737guy on 05/22/06, Message No. 17658
Could you broad your case . What is the process?it is on a r...
Posted 05/30/06 13:35 PST, Message No. 17680
how can I find trigonometric table values for degrees in MS excel...
Topic started by gerdb on 04/08/06, Message No. 17429
This kind of function lives in the Exell and prior spreadsheets s...
Posted 04/08/06 15:24 PST, Message No. 17430
Cooling Channel Design Question
Topic started by sfergus2 on 04/04/06, Message No. 17416
A picture or image, worth  1000 words. Do you have a DW...
Posted 04/04/06 10:09 PST, Message No. 17417
Volume of diesel fuel:
Topic started by SGTPAB on 03/17/06, Message No. 17365
 You have to get the expansion thermal coefficient. You...
Posted 03/18/06 16:27 PST, Message No. 17367
Questions regarding maximum yield stress for standard hardened st...
Topic started by john2005 on 03/01/06, Message No. 17335
Single shear strength is 130,000 is the solution your pi...
Posted 03/03/06 16:30 PST, Message No. 17337
Refrigeration and night covers..
Topic started by Food Safe on 02/13/06, Message No. 17299
Seem to be a dark shielded or insulated curtain to close the fron...
Posted 03/03/06 16:16 PST, Message No. 17336
Vacuum Vessel Design
Topic started by 737guy on 12/14/05, Message No. 17135
vol VIII deals with it , it is call vessel under external pressur...
Posted 12/18/05 17:53 PST, Message No. 17139
thermocouple cleaning
Topic started by kiva123 on 10/07/05, Message No. 16869
what thermocouple? what contamination or dirt?
Posted 10/16/05 19:43 PST, Message No. 16919
Steels affected by heat
Topic started by 737guy on 10/04/05, Message No. 16842
Hi 737guy , to be so intempestive in your post, could make hard t...
Posted 10/05/05 18:25 PST, Message No. 16849
why the progressive change in pipe diameter in pneumatic transpor...
Topic started by engrilyas on 10/03/05, Message No. 16833
When handling any fluid , if you add or rest flow make to change ...
Posted 10/05/05 18:30 PST, Message No. 16850
heli coil or thread length
Topic started by darin on 08/25/05, Message No. 16676
To avoid loose due vibration , better use a lock whaser or tye it...
Posted 08/26/05 05:08 PST, Message No. 16681
Request for material recommendation for miniature plane sleeve bu...
Topic started by john2005 on 08/23/05, Message No. 16673
Give a trip here
Posted 09/02/05 10:16 PST, Message No. 16707
Why not to use a sinterized bronze prelub bushing??? What is the...
Posted 08/25/05 20:16 PST, Message No. 16679
Expansion / Contraction of Ice
Topic started by ecoulson on 08/16/05, Message No. 16647
Where the plumbing code , does not exist, we see broken pipes by ...
Posted 08/21/05 19:27 PST, Message No. 16663
Water get it's small volume at 4°C , it is why the ice break pipe...
Posted 08/16/05 19:15 PST, Message No. 16649
Electric panel Cooling
Topic started by manikandeswar on 08/12/05, Message No. 16629
look at here please
Posted 08/14/05 10:32 PST, Message No. 16632
density of bone by archimedes' principle
Topic started by simon_g on 08/11/05, Message No. 16626
also you can coat the bone with a paint
Posted 08/14/05 10:34 PST, Message No. 16634
Definition or any information for the following geometric entitie...
Topic started by rmallappa on 08/04/05, Message No. 16601
Seem to be all this are ACAD related topics. If so use the ACAD ...
Posted 08/04/05 12:49 PST, Message No. 16606
thread specification
Topic started by chandran on 08/03/05, Message No. 16598
Yes , it was a brain typo, the hands go faster than mind.
Posted 08/04/05 11:18 PST, Message No. 16605
Your rod is quite near a 3/16 " [3.75 mm] , so you can therad a...
Posted 08/03/05 18:33 PST, Message No. 16600
need chemical specs for AR400...
Topic started by bmorrow492 on 08/01/05, Message No. 16589
A simple google search :
Posted 08/02/05 09:09 PST, Message No. 16595
Try at
Posted 08/01/05 16:18 PST, Message No. 16590
sulcated springs?
Topic started by mikecwh on 07/28/05, Message No. 16571
Posted 07/31/05 18:17 PST, Message No. 16585
thermogradient table
Topic started by devitg on 07/10/05, Message No. 16439
I need to make a thermogradient table for 0°C to 50° C , I have r...
Posted 07/10/05 18:22 PST, Message No. 16439
Please help: Marking for nut and bolt assembly to trace moves
Topic started by richxie on 06/03/05, Message No. 16253
I do not kown what it was , but a small drop of sintetic or nail ...
Posted 06/04/05 21:33 PST, Message No. 16262
<< back  Showing Messages 31-60 (of 296)  Next >>

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2018 eFunda, Inc.