engineering fundamentals Member Info (rorschach)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators






Basic Information
UserName: rorschach
Name: Stan Burton
Location: Spring, Texas
Occupation Mechanical/Electromechanical Designer
Specialty: currently involved with ROV design
Profile Summary
I am a Mech/Electromech Designer with 15 years exp. in multiple disciplines including Downhole oil tools & Industrial computers and automation. I currently design ROV's and equip. I am an information junkie and I find material science fascinating.
 more about rorschach ...

Posts by rorschach
[ Order by Time Posted ] [ Group by Topic ] [ Topics by rorschach ] [ All Topics ]
Showing Messages 1-30 (of 2078)  Next >>
Window for pressurized chamber made from laminated glass?
Topic started by battleship81 on 10/22/10, Message No. 21243
I would agree that you should be using laminated safety glass (ba...
Posted 10/27/10 13:01 PST, Message No. 21249
Magnetism not desired while modifying a stainless steel rod
Topic started by PJMVatPLXS on 12/19/09, Message No. 20927
this is especially common in low alloy stainlesses such as 301 or...
Posted 10/27/10 13:58 PST, Message No. 21254
How Big a Dish do I need?
Topic started by crackerjack on 09/18/06, Message No. 17973
Why build when you can buy ultra high gain Yagi's?http://www.ante...
Posted 09/20/06 12:45 PST, Message No. 17982
crackerjack. you don't need an antenna amp. a parabolic dish is p...
Posted 09/20/06 12:36 PST, Message No. 17981
Soldering Iron tip
Topic started by taurusthetenacious on 08/26/06, Message No. 17923
Most tips are copper with an Iron or nickel plating. but a copper...
Posted 09/20/06 13:06 PST, Message No. 17984
Machining finish question.
Topic started by rorschach on 08/09/06, Message No. 17874
Using a good quality CNC lathe machining a paraboloid, (section o...
Posted 08/09/06 12:53 PST, Message No. 17874
Unique thread call out 4-36 UNS
Topic started by jbelle7435 on 08/01/06, Message No. 17866
4-36 is nonstandard you're unlikely to be able to find gauges, ta...
Posted 08/01/06 13:25 PST, Message No. 17867
Proper drawing material specification for steel
Topic started by sfiacchino on 06/19/06, Message No. 17736
a follow up example of how a company standard for materials can b...
Posted 06/20/06 08:32 PST, Message No. 17740
Like all things, that depends... if the strength or heat tre...
Posted 06/19/06 14:20 PST, Message No. 17737
hardness vs. yield strength
Topic started by sfiacchino on 06/16/06, Message No. 17726
not to mention that differences in quenching can result in very l...
Posted 06/20/06 08:35 PST, Message No. 17741
Solidworks version problem
Topic started by just_engineer on 06/14/06, Message No. 17720
Directly, no you cannot save a solidworks file to an earlier vers...
Posted 06/19/06 14:33 PST, Message No. 17738
Topic started by cessna on 05/31/06, Message No. 17688
mag particle on aluminum is not possible, but eddy current may be...
Posted 07/06/06 11:13 PST, Message No. 17805
Removing moisture from closed-loop system
Topic started by 737guy on 05/22/06, Message No. 17658
would passing the air through a fluidized bed of Silica Gel dessi...
Posted 06/29/06 11:42 PST, Message No. 17774
Topic started by jomeloco on 05/20/06, Message No. 17644
A recuperator for Helium? The only application I can think of tha...
Posted 05/22/06 13:18 PST, Message No. 17656
Heat treatement of 4140 Alloy steel to 45 Rockwell "C" (Rc)
Topic started by adb on 05/16/06, Message No. 17617
Is the requirement of high hardness for strength or for surface h...
Posted 05/22/06 13:15 PST, Message No. 17655
how can weldding glass to iron ?
Topic started by afs_zare on 05/13/06, Message No. 17610
Gerdb, Sorry, wrong answer. If you are talking about glass to met...
Posted 05/22/06 13:09 PST, Message No. 17654
Drawing Problem
Topic started by vibhanshu2 on 05/03/06, Message No. 17576
My position, depending on the type of deviation we are talking ab...
Posted 05/08/06 08:47 PST, Message No. 17596
release of a suction cup in a confined area
Topic started by richchow on 04/27/06, Message No. 17554
there are suction cups that are sold with just such an airline fi...
Posted 04/28/06 09:13 PST, Message No. 17559
drilling delrin
Topic started by gerdb on 04/25/06, Message No. 17540
Gerdb, is it possible to drill from each side of the part? I'd tr...
Posted 04/26/06 07:25 PST, Message No. 17546
Topic started by nithi on 04/21/06, Message No. 17514
You have not provided enough information. The geometry is going t...
Posted 04/21/06 12:27 PST, Message No. 17517
Topic started by elohor on 04/20/06, Message No. 17500
Spike is right, Aluminum is known as a reactive/passive metal. Me...
Posted 04/21/06 07:06 PST, Message No. 17511
Airflow / pressure question
Topic started by 737guy on 04/18/06, Message No. 17473
Ah but I believe the operative phrase is "if you keep the te...
Posted 04/19/06 13:20 PST, Message No. 17483
relation between different hardness units
Topic started by lakhtin on 04/18/06, Message No. 17466
I will add that the conversion tables are empirical and are based...
Posted 04/19/06 13:40 PST, Message No. 17486
what is the difference between a fan and a blower?
Topic started by goda on 04/17/06, Message No. 17462
I seem to recall seeing a similar question some time back.  ...
Posted 04/19/06 13:09 PST, Message No. 17481
why are high steel carbon,also called tool steelsw
Topic started by elohor on 04/17/06, Message No. 17461
High carbon steels (some with up to 1% carbon) are known as tool ...
Posted 04/21/06 07:14 PST, Message No. 17512
Topic started by JENNISMARIE on 04/16/06, Message No. 17454
A hot wire Anemometer should be fairly easy to construct as well,...
Posted 04/19/06 13:16 PST, Message No. 17482
COTS Vibration Testing
Topic started by zaclevine on 04/13/06, Message No. 17443
Cessna is right, there is a little bit of the black arts in the p...
Posted 04/19/06 13:35 PST, Message No. 17485
Switching from steel to aluminium?
Topic started by sidz on 04/12/06, Message No. 17433
I'm not familiar with the steel you mentioned so I'm not sure how...
Posted 04/21/06 06:57 PST, Message No. 17510
Which property is important to your application? Strength? Hardne...
Posted 04/19/06 13:29 PST, Message No. 17484
Stray Current Corrosion and Reinforced Concrete
Topic started by rorschach on 03/15/06, Message No. 17359
The steel support structures of the bridge abutments were damaged...
Posted 03/16/06 10:40 PST, Message No. 17364
Showing Messages 1-30 (of 2078)  Next >>

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2018 eFunda, Inc.