engineering fundamentals Member Info (bqtran)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators

Materials

Design

Processes

Units

Formulas

Math
 
 
  

Posts by bqtran
[ Order by Time Posted ] [ Group by Topic ] [ Topics by bqtran ] [ All Topics ]
HEAT TRANSFER
I'D APPRECIATE YOUR HELP TO ANALYZE THE FOLLOWING HEAT TRANSFER S...
Posted 02/23/05 07:13 PST
DEFLECTION ANALYSIS
I'M ANALYZING THE DESIGN OF A PRESS TABLE. THERE ARE 70 AIR CYLI...
Posted 02/22/05 10:40 PST
Deflection of a flat sloped tank bottom
Dave, Thanks again for your input. The tank bottom thickness ...
Posted 01/05/05 09:06 PST
Deflection of a flat sloped tank bottom
Acroduster1, Thank you for your input. We build this type of t...
Posted 01/04/05 09:09 PST
Deflection of a flat sloped tank bottom
Dave, Thank you for the formula. I've tried it with all the ap...
Posted 01/04/05 05:44 PST
Deflection of a flat sloped tank bottom
Sam, Thank you for your input. The tank bottom indeed is flat ...
Posted 01/03/05 06:21 PST
Deflection of a flat sloped tank bottom
Dave, Thank you for your help. I don't have access to any stru...
Posted 12/30/04 05:41 PST
Deflection of a flat sloped tank bottom
Is there a relatively simple method to figure out the deflection ...
Posted 12/29/04 12:26 PST
Beam Deflection
I did, and the answer is dropping a block of 70 lbs frozen butter...
Posted 12/16/04 06:01 PST
Welding light gauge stainless steel jacket
When welding fittings to a light gauge (14 gauge) 304 stainless s...
Posted 09/13/04 10:57 PST
Vacuum generated by temperature change
Thank you for the reply. I forgot to mention that there was a 3" ...
Posted 06/03/04 13:21 PST
Vacuum generated by temperature change
I'd appreciate help to figure out vacuum generated from temperatu...
Posted 06/03/04 09:53 PST
Lid support self-locking
Thank you for the suggestive idea. I'd appreciate a sketch to sho...
Posted 05/17/04 09:09 PST
Lid support self-locking
I'm trying to design a simple support for tank lid. We all know t...
Posted 05/10/04 10:52 PST
Vacuum Chamber Design
Sir, Thanks for your comment and suggestion. One thing I forgo...
Posted 05/06/04 12:28 PST
Vacuum Chamber Design
Sir, Thank you for the analysis. Please clarify how you came u...
Posted 05/05/04 12:59 PST
Vacuum Chamber Design
I'm working on a project fixing a vacuum chamber. This is a regt...
Posted 05/05/04 06:38 PST
Beam Deflection
The equation I'm using for beam deflection is PL^3/48EI. Thank...
Posted 04/30/04 05:40 PST
Beam Deflection
Does any one have experience with beam deflection due to a load t...
Posted 04/27/04 13:18 PST

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2017 eFunda, Inc.