engineering fundamentals Member Info (john2005)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators

Materials

Design

Processes

Units

Formulas

Math
 
 
  

Posts by john2005
[ Order by Time Posted ] [ Group by Topic ] [ Topics by john2005 ] [ All Topics ]
Showing Messages 1-30 (of 65)  Next >>
Questions regarding the function of vehicle rubber body mounts
Hi everyone,I have some questions regarding  the functioning...
Posted 10/22/08 11:50 PST
Request for recommendation for self locking nut with greatest rem...
If I use a regular non hardened hex nut (maybe a grade 2 or a bra...
Posted 07/25/08 23:06 PST
Request for recommendation for self locking nut with greatest rem...
Hi everyone, I'm hoping someone having experience with self lo...
Posted 07/25/08 16:54 PST
Pre-hard machinable steel with highest compressive yield strength
Hi everyone, Can anyone please tell me what machinable pre-hard ...
Posted 05/31/08 15:05 PST
Request for material recommendation (probably a Titanium alloy)
Hi everyone,I need to machine two small parts. One part requires ...
Posted 05/28/08 20:58 PST
Coefficient of friction for caged versus non-caged needle bearing...
Hi Dave, Thanks for your reply. I'm just considering this fo...
Posted 12/11/07 21:25 PST
Coefficient of friction for caged versus non-caged needle bearing...
Hi everyone,Can anyone please tell me the general difference betw...
Posted 12/06/07 19:33 PST
Recommendation for best hole tolerance for a "tap fit" i.e., lig...
Someone from another forum gave me the following from Machinery's...
Posted 11/30/07 12:27 PST
Recommendation for best hole tolerance for a "tap fit" i.e., lig...
Hi everyone, I would like to ask if anyone can please recommend ...
Posted 11/29/07 22:20 PST
Request for help with extension-spring biasing problem
Hello everyone, I would like to ask if anyone can please help ...
Posted 09/20/07 21:54 PST
Questions regarding spherical rod-end standards and/or mounting a...
Hi everyone, Does anyone know if there are any standards that ...
Posted 08/07/07 11:37 PST
Request for help reducing friction and noise of a cam follower ro...
Regarding figure 2 at the link in my previous post, the very inne...
Posted 06/06/07 18:10 PST
Request for help reducing friction and noise of a cam follower ro...
After checking into this further, I think that this might be a ca...
Posted 06/06/07 17:24 PST
Request for help reducing friction and noise of a cam follower ro...
Thanks for the additional feedback gerdb, John
Posted 06/02/07 10:35 PST
Request for help reducing friction and noise of a cam follower ro...
Hi everyone, Thanks for the additional feedback. Actually, ...
Posted 06/01/07 19:39 PST
Request for help reducing friction and noise of a cam follower ro...
Hi Mdg_cam, Thanks for your message. Actually, the preload ...
Posted 05/31/07 20:57 PST
Request for help reducing friction and noise of a cam follower ro...
Hi Metal5192, Thanks for your reply. The parts were suppose...
Posted 05/27/07 13:06 PST
Request for help reducing friction and noise of a cam follower ro...
Hi everyone, I would like to ask if anyone could please help m...
Posted 05/25/07 18:44 PST
Questions regarding experiences with loctite & using 680 or 630 s...
Hi everyone, I tested some 270, 271, 262, 2760, 638, & 680 loc...
Posted 12/22/06 14:38 PST
Questions regarding experiences with loctite & using 680 or 630 s...
Hi Gerdb, Thanks for your replies. I contacted loctite and the...
Posted 12/16/06 17:19 PST
Questions regarding experiences with loctite & using 680 or 630 s...
Hi everyone, Is there anyone in the forum that has used any of...
Posted 12/08/06 19:18 PST
Questions regarding adjustment screw method and push-nuts
Hi Everyone, I would like to ask if anyone could please offer ...
Posted 12/02/06 22:27 PST
Request for advice regarding press fit of dowel / shafting (with ...
Thanks for your replies Gerdb.I appreciate your input.Gerdb wrote...
Posted 07/22/06 18:55 PST
Request for advice regarding press fit of dowel / shafting (with ...
Hi Gerdb, Thanks for your reply to my questions. Do you do...
Posted 07/22/06 13:58 PST
Request for advice regarding press fit of dowel / shafting (with ...
Hi everyone, I have a small cantilevered mounted bearing housi...
Posted 07/21/06 11:58 PST
Request for advice regarding manufacture of a spring anchor (with...
Hi everyone, Well, I guess there should be no problem making t...
Posted 07/09/06 10:32 PST
Request for advice regarding manufacture of a spring anchor (with...
Hi Gerdb, Thanks for your message. I like the extra strengt...
Posted 07/08/06 10:23 PST
Request for advice regarding manufacture of a spring anchor (with...
Hi Gerdb, I found a Part # 92196A281 from www.mcmaster.com tha...
Posted 07/07/06 15:10 PST
Request for advice regarding manufacture of a spring anchor (with...
Hi everyone, I found a part # 92196A279 from www.mcmaster.com ...
Posted 07/06/06 21:37 PST
Request for advice regarding manufacture of a spring anchor (with...
Hi Gerdb, Thanks for the additional info. I found a Part # ...
Posted 07/06/06 13:18 PST
Showing Messages 1-30 (of 65)  Next >>

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2017 eFunda, Inc.