engineering fundamentals Member Info (marks)
Directory | Career | News | Standards | Industrial | SpecSearch®
Home Membership Magazines Forum Search Member Calculators

Materials

Design

Processes

Units

Formulas

Math
 
Basic Information
UserName: marks
Name: marks
Location: Salt Lake City, UT, USA
Occupation Mechanical Engineer
Specialty: Design & embedded systems
E-Mail: Stringham.M@duraauto.com
 
Profile Summary
No profile summary on file.
 
  

Posts by marks
[ Order by Time Posted ] [ Group by Topic ] [ Topics by marks ] [ All Topics ]
PM (preventive maintenance) schedules
Can anyone recommend a good format for writing PM schedules and/o...
Posted 06/25/01 13:01 PST
ceramic adhesive with high heat resistance?
I have used a ceramic-based cement to glue metal rods into a cera...
Posted 05/11/01 10:36 PST
Comparison between these Three CAD/CAM Soft wares.
Ford uses I-DEAS.
Posted 05/04/01 14:23 PST
flame propogation
Check out this website: http://thermal.sdsu.edu/grads/jwest/EST/...
Posted 03/12/01 10:50 PST
"servo gripper"
Does anyone know of a source for a "servo gripper" and any litera...
Posted 02/19/01 07:02 PST
alternative to pneumatic rodless cylinders
Hello all, I am looking for a reliable and *low cost* replacemen...
Posted 01/31/01 07:55 PST
Worm gear rotation
Please comment regarding the rotation of a worm gear (use standar...
Posted 01/05/01 13:32 PST
correct method of thread callout
I thought the "1/4 - 20" portion of the callout was standard prac...
Posted 12/14/00 09:52 PST
correct method of thread callout
What it the standard method of calling out an inside screw thread...
Posted 12/14/00 08:48 PST
Using "fail safe" brakes
I am working on a machine which has a carriage mounted on a horiz...
Posted 10/18/00 11:01 PST
Attn CAD gurus: advice on 2d -> 3d migration
Thank you all for the input! I appreciate your advice. I too agre...
Posted 10/02/00 11:48 PST
Attn CAD gurus: advice on 2d -> 3d migration
Regarding PDM, I have never used a formal PDM system except for t...
Posted 09/29/00 11:01 PST
Attn CAD gurus: advice on 2d -> 3d migration
In your experience of migrating from 2d to 3d, how did you choose...
Posted 09/29/00 09:39 PST
Attn CAD gurus: advice on 2d -> 3d migration
My company is changing from 2d to 3d CAD. We have thousands of 2d...
Posted 09/28/00 10:04 PST
Prototypes, connectors
I totally agree! Select a standard connector whenever possible! I...
Posted 09/28/00 09:41 PST
CAD models of basic fasteners
Thanks for the web link! Do you know of any sites with 3D cad ...
Posted 09/22/00 07:02 PST
CAD models of basic fasteners
I am looking for *free* cad models (iges, step, or other) of basi...
Posted 09/21/00 15:16 PST
Method of cutting sheet metal (handtools)
Thanks for the advice. I have a friend with access to a milling ...
Posted 08/31/00 14:19 PST
Method of cutting sheet metal (handtools)
Can you recommend a method of cutting a nice rectangular cutout i...
Posted 08/29/00 14:19 PST
Waterproof enclosures for electronics?
Dr Funda, You are correct, this is an automotive-realated applic...
Posted 08/10/00 21:49 PST
Waterproof enclosures for electronics?
Hello, I am trying to design a small plastic enclosure to house ...
Posted 08/10/00 11:38 PST

Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2017 eFunda, Inc.