![]() |
O Ring Material Suitable for Bromine Gas
Home |
Directory |
Career |
News |
Industrial
|
|
|
|
Glossary » Design » Oring » Chemical » Bromine Gas
Common O-Ring materials that are SUITABLE for dynamic and static seal in the environment containing Bromine Gas include
The O-Ring materials below are USUALLY SUITABLE for static seal in the environment containing Bromine Gas.
O-Ring materials that are NOT SUITABLE for using in the environment containing Bromine Gas include
Additional Information
There is not enough data to determine whether the following common O-Ring materials are suitable for using in the environment containing Bromine Gas or not.
Related Glossary Pages
Glossary: Design: Oring: Material: Neoprene
Glossary: Design: Oring: Chemical: Methyl Acetate Glossary: Design: Oring: Material: Virgin Teflon Glossary: Design: Oring: Chemical: Automotive Brake Fluid Glossary: Design: Oring: Chemical: Hexane Glossary: Design: Oring: Chemical: Gallic Acid Glossary: Design: Oring: Chemical: Hydrofluoric Acid Glossary: Design: Oring: Chemical: Diethylamine Glossary: Design: Oring: Chemical: Calcium Hydroxide Glossary: Design: Oring: Material: Styrene Butadiene Related Pages
eFunda: Chemicals Compatibile with O-Ring Material chemraz
Brake Fluid (0), Bromine Gas (4), Bromobenzene (4). Bunker Oil (4), Butadiene Monomer (4), Butane (4). Butter (4), Butyl Alcohol (4), Butyl Carbitol (4) ...
Mechanical Design Guidelines for Bearings
Introduction to bearings which are needed whenever one part of a machine slides against another. An brief history of the development of bearings.
eFunda: AS 568A Standard Sizes for O-Rings (001 - 114)
Database for the selection of AS 568A Standard Size O-Rings. Nominal and actual sizes (ID, OD, width) are included for AS 568A sizes 001 to 114 and 115 to ...
eFunda: Chemicals Compatibile with O-Ring Material Neoprene
Brake Fluid (1), Bromine Gas (1), Bromobenzene (1). Bunker Oil (0), Butadiene Monomer (0), Butane (0). Butter (3), Butyl Alcohol (4), Butyl Carbitol (2) ...
Column Design: Structural Steel
Compute critical buckling load for structural steel columns.
Boss Design
Boss and insert design guidelines. Equations for maximum insertion force and hoop stress for placement of insert into boss.
Surface Treatments: Conversion Coatings
Thick coatings from 25 to 75 µm (1000 to 3000 µin) are more durable and abrasion resistant than above chemical conversion oxide coatings. ...
Surface Treatments: Thin-Film Coating
Physical Vapor Deposition (PVD) and Chemical Vapor Deposition (CVD) are two most common types of thin-film coating methods. They are briefly discussed in ...
eFunda: O-Ring Materials Compatibile with Chemical Acetaldehyde
Chemical compatibility database selector for o-rings materials.
Column Design
Design-2-Part ... The secant formula can be used to compute the allowable normal stress for a given design,. where sallow is the maximum allowable stress ...
|
||||||||