Common O-Ring materials that are SUITABLE for dynamic and static seal in the environment containing VV-H-910 include

• Chemraz: Chemraz combines the resilience and sealing force of an elastomer with chemical resistance approaching that of PTFE.
• Ethylene-Propylene: Ethylene-propylene (EP) is a copolymer of ethylene and propylene.
• Fluorocarbon: Fluorocarbon elastomer (FKM) material is also known by its tradename VITON or Fluorel.
• Styrene Butadiene: Styrene-Butadiene rubber (SBR) has properties similar to those of natural rubber.

The O-Ring materials below are USUALLY SUITABLE for static seal in the environment containing VV-H-910.

• Epichlorohydrin: Epichlorohydrin (ECO) has properties similar to nitrile rubber but with better heat and oil resistance as well as better low temperature flexibility.
• Fluorosilicone: Fluorosilicone combines excellent low-temperature performance of silicone with improved chemical resistance.
• Hypalon: Hypalon is the traenme of a clasof Chlorosulfonated Polyethylene (CSM).
• Natural Rubber: Natural rubber is a product coagulated from the latex of the rubber tree, hevea brasiliensis.
• Neoprene: Neoprene is a homopolymer of chlorobutadiene (CR).

The following O-Ring materials are SOMETIMES OK for static seal but not for dynamic seal in the environment containing VV-H-910.

• Buna-N (Nitrile): Buna-N, also known as Nitrile rubber, is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene.
• Hydrogenated Nitrile: Hydrogenated Nitrile Butadiene Rubber (HNBR) is also known as Highly Saturated Nitrile (HSN).

O-Ring materials that are NOT SUITABLE for using in the environment containing VV-H-910 include

• Polysulfide: Polysulfide was one of the first commercial synthetic elastomers.
• Millable Polyurethane: Millable Polyurethane rubber is made from both polyester and polyether polyols.