O Ring Material FluorosiliconeHome | Directory | Career | News | Industrial
Glossary » Design » Oring » Material » Fluorosilicone
Fluorosilicone combines excellent low-temperature performance of silicone with improved chemical resistance. It has very good resistance to military and aerospace fuels. Excellent performance in oxygen plasma environments. It is rather vulnerable to polar solvents and hydro-carbon fluids and has limited abrasion resistance.
Fluorosilicone is suitable for dynamic and static seal of o-rings in the environment containing the following chemicals: Acetamide, Acetyl Chloride, Air below 200 C, Aluminium Chloride, Aluminium Flouride, Aluminium Sulfate, Concentrated Ammonium Hydroxide, Ammonium Sulfate, Amyl Alcohol, Animal Oil, ASTM Oil One, ASTM Oil Three, ASTM Oil Two, Beer, Benzine (Ligroin), Benzophenone, Benzyl Benzoate, Boric Acid, Bunker Oil, Butter, Butyl Alcohol, Calcium Carbonate, Calcium Chloride, Calcium Nitrate, Calcium Sulfide, Carbonic Acid, Castor Oil, Chlorinated Solvents, Dry Chlorine, Chromic Acid, Citric Acid, Cod Liver Oil, Coffee, Corn Oil, Coal Tar Creosote, Denatured Alcohol, Diesel Oil, Di-ester Lubricant MIL-L-7808, Diethylamine Glycol, Dow Guard, Dowtherm A, Elco 28 Lubricant, Ethanol, Ethyl Alcohol, Ethyl Benzene, Ethyl Benzoate, Ethyl Chloride, Ethyl Formate, Ethyl Hexanol, Ethyl Silicate, Ethylene, Ethylene Glycol, Fuel Oil, Gallic Acid, Automotive Gasoline, Gelatine, Glucose, Glycerin, General Glycol, Petroleum Base Grease, Helium, Heptane, Hexane, Petroleum Base Hydraulic Oil, Hydrobromic Acid, Iodine, Kerosene, Animal Fat Lard, Linsed Oil, Petroleum Base Lubricating Oils, Mercuric Chloride, Methanol, Methyl Alcohol, Methyl Bromide, Methyl Ether, MIL-F-25558 (RJ-1), MIL-H-5606, MIL-H-7083, Milk, MIL-R-25576 (RP-1), Type 1 Fuel MIL-S-3136, MIL-S-81087, Mineral Oils, Monovinyl Acetate, Naphthalene, Naphthalenic, Neatsfoot Oil, Gas Nitrogen, Oleic Acid, Oronite 8200, Oxalic Acid, Cold Oxygen, Ozone, Peanut Oil, Petroleum Oil, Phosphoric Trichloride, Pine Oil, Potassium Nitrate, Potassium Sulfate, Propanol, Propyl Alcohol, 90E 65E 50E 30E Pydraul, Transformer Oil Pyranol, Rapeseed Oil, Red Oil, RJ-1 (MIL-F-25558), RP-1 (MIL-R-25576), Sea Water, Silicone Grease, Silicone Oils, Silver Nitrate, Sodium Bicarbonate, Sodium Carbonate, Sodium Chloride, Soyabean Oil, Stoddard Solvent, Sulfur Chloride, Tannic Acid, Tartaric Acid, Tetrabutyl Titanate, Tetralin, Type A Transmission Fluid, Fresh Water, Whiskey, White Pine Tar.
O-Ring material Fluorosilicone is usually suitable for static seal in the environment containing Alkazene, Amyl Chloronaphthalene, Arachlor 1248, Argon, Aromatic Fuel 50%, Askarel Transformer Oil, ASTM Fuel A, ASTM Fuel B, ASTM Fuel C, ASTM Oil Four, Benzene, Benzene Sulfonic Acid, Benzoic Acid, Benzyl Alcohol, Benzyl Chloride, Bleach Liquor, Borax Solutions, Bromine Gas, Bromobenzene, Butadiene Monomer, Butane, Calcium Hydroxide, Calcium Hypochlorite, Carbitol 2, Carbolic Acid (Phenol), Carbon Disulfide, Carbon Monoxide, Tung Oil China Wood Oil, Chlordane, Chlorine Dioxide, Wet Chlorine, Chrome Plating Solution, Coolanol Monsanto, Crude Oil (Asphalt Base), Cyclohexane, Dichloro-Butane, Dimethyl Phthalate, Diphenyl, Dow Corning 550, Ethane, Ethyl Chlorocarbonate, Ethyl Oxalate, Ethyl Pentachlorobenzene, Freon 11 (M), Freon 114, Hexyl Alcohol, Hydrocyanic Acid, Hydrogen Peroxide, Hydroquinone, Iso Octane, Isobutyl Alcohol, Isopropanol, Isopropyl Chloride, JP 3 MIL-J5624, JP 4 MIL-J5624, JP 5 MIL-J5624, JP 6 MIL-J5624, Liquefied Petroleum Gas (LPG), Lye, Malathion, Methyl Chloride, Methyl Oleate, Methylene Chloride, MIL-F-25656, MIL-G-25760, JP-5 JP-4 JP-3 MIL-J 5624, MIL-L-25681, N-Octane, Octyl Alcohol, Phenol, Producer Gas, Propane, Propylene, Dry Sulfur Dioxide Gas, Wet Sulfur Dioxide Gas, Liquefied Under Pressure Sulfur Dioxide, Sulfur Hexafluoride, Sulfur Trioxide, Tertiary Butyl Alcohol, Tetrabromoethane, Tetrachloroethylene, Toluene, Turbine Oil, Turpentine, Varnish, VV-H-910.
O-Ring material Fluorosilicone is sometimes ok for static seal but not for dynamic seal in the environment containing chemicals such as Acetylene Gas, Ammonium Nitrate, Aniline, Aniline Oil, Carbon Tetrachloride, Dibutyl Phthalate, Ethylene Trichloride, Hydrogen Gas, Isopropyl Ether, Hydraulic Fluid (Phosphate Ester Type) Lindol, N-Pentane, Phosphoric Acid, Stearic Acid, Styrene Monomer, Sucrose Solutions, Vinegar.
Fluorosilicone is not suitable for o-rings exposed in the environment containing chemicals such as Glacial Acetic Acid, Acetic Anhydride, Acetone, Acetophenone, Acrylonitrile, Aluminium Acetate, Anhydrous Ammonia, Hot Gas Ammonia, Ammonium Chloride, Amyl Acetate, Automotive Brake Fluid, Benzaldehyde, Brake Fluid, Butyl Carbitol, Butyl Cellosolve, Butyraldehyde, Cellosolve, Chloracetic Acid, Chlorosulfonic Acid, Diacetone, Diacetone Alcohol, Diethylamine, Dimethyl Formamide, Dioxane, Ethyl Acetoacetate, Ethyl Cellulose, Ethyl Diamine, Ethyl Ether, Ethylene Dichloride, Ethylene Oxide, Freon 113, Freon 13, Freon TF, Furfural, Furfuryl Alcohol, Hydrazine, Gas Hydrobromic Acid, Hydrofluoric Acid, Isopropyl Acetate, Lacquer Solvents, Lacquers, Methyl Acetate, Methyl Acrylate, Methyl Butyl Ketone, Methyl Cellosolve, Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK), Methyl Methacrylate, Naphtha, N-Hexaldehyde, Nitrobenzene, Nitroethane, Nitrogen Tetroxide, Nitromethane, Nitropropane, Oleum (Fuming Sulfuric Acid), Propyl Acetate, Propylene Oxide, 10E Pydraul, 540C 312F 230C Pydraul, 55 (Phosphate Ester) 53 43 Pyrogard 42, Radiation, Steam to 350F, Tetrahydrofuran, Triethanolamine, Wagner 21B Brake Fluid.
There is not enough data to determine whether Fluorosilicone is suitable for using in the environment containing the following chemicals or not. Acetaldehyde, Aluminium Nitrate, Cold Gas Ammonia, Ammonium Carbonate, Ammonium Persulfate Solution, Ammonium Phosphate, Amyl Borate, ASTM Fuel D, Automatic Transmission Fluid, Chlorine Trifluoride, Chloroform, Creosylic Acid, Dibenzyl Ether, Epoxy Resins, Ethyl Mercaptan, Formaldehyde, Freon 112, Freon 114B2, Freon 12, Freon 21, Freon 22, Freon 31, Freon 32, Freon 502 (F22+F316), Freon C318, FREON R134A, Furan, Hydrochloric Acid, Linoleic Acid, Maleic Acid, Mercury, Methane, Methyl Mercaptan, Methyl Propyl Salicylate, Methylacrylic Acid, Natural Gas, Nitric Acid, 200-400F Oxygen, Phenylhydrazine, Skydrol 500, Sodium Hydroxide, Sulfuric Acid (Concentrated), Sulfurous Acid, Tertiary Butyl Mercaptan, Tetrachloroethane, Tetraethyl Lead, Xylene.
Related Glossary Pages
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-9
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Polymers: Acrylonitrile-Butadiene-Styrene: Injection Molding Grade, Platable
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1525
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI M1015
Glossary: Design: Oring: Material: Chemraz
Glossary: Design: Oring: Chemical: Wet Sulfur Dioxide Gas
Glossary: Materials: Alloys: Steel: Stainless Steel: PH 13-8Mo
Glossary: Design: Oring: Chemical: Acetic Anhydride