eFunda: Glossary: Materials: Alloys: Aluminum Alloy: AA 2014

AA 2014 is categorized as Wrought Aluminum Alloy. It is composed of (in weight percentage) 93.50% Aluminum (Al), 0.80% Silicon (Si), 4.40% Copper (Cu), and 0.50% Magnesium (Mg). It can be seen in forms of sheet, plate, extruded rod bar and wire, extruded shapes, extruded tubes, cold finished rod bar and wire, drawn tube, and forgings.

Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.

The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm³. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.

Other common Wrought Aluminum Alloys include AA 1050, AA 1060, AA 1100, AA 1145, AA 1199, AA 1350, AA 2011, AA 2024, AA 2036, AA 2048, AA 2124, AA 2218, AA 2219, AA 2319, AA 2618, AA 3003, AA 3004, AA 3105, AA 4032, AA 4043, AA 5005, AA 5050, AA 5052, AA 5056, AA 5083, AA 5086, AA 5154, AA 5182, AA 5252, AA 5254, AA 5356, AA 5454, AA 5456, AA 5457, AA 5652, AA 5657, AA 6005, AA 6009, AA 6010, AA 6061, AA 6063, AA 6066, AA 6070, AA 6101, AA 6151, AA 6201, AA 6205, AA 6262, AA 6351, AA 6463, AA 7005, AA 7049, AA 7050, AA 7072, AA 7075, AA 7175, AA 7178, and AA 7475.

Glossary: Materials: Polymers: Fluoroplastics: Modified PE-TFE: Unfilled

Glossary: Materials: Polymers: Polyphenylene Sulfide: 65% Mineral and Glass Filled

Glossary: Materials: Polymers: Polyphenylene Oxide: Alloy With Polystyrene, Impact Modified

Glossary: Materials: Alloys: Steel: Stainless Steel: 17-10P

Glossary: Materials: Alloys: Steel: Carbon Steel: AISI M1008

Glossary: Materials: Polymers: Polyamide: Nylon (PA 46): Super-Tough

Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 10% PTFE: Lubricated

Glossary: Materials: Polymers: Liquid Crystal Polymer: 50% Mineral Filled

Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C16200

Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C61300

eFunda: Listing of UNS C6xxxx Copper Alloys

Wrought Alloys. Cu Alloy List ... Name, Type, Common Name. UNS C60800, Wrought, Aluminum bronze, 5% ... UNS C65500, Wrought, High-silicon bronze, A ...

eFunda: Plate Calculator -- Clamped rectangular plate with ...

This calculator computes the displacement of a clamped rectangular plate under a uniform load.

eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043

eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043.

eFunda: Listing of Titanium Alloys

Ti-5Al-2.5Sn, Wrought, Alpha alloy. Ti-5Al-2.5Sn-ELI (low O2), Wrought, Alpha alloy. Ti-5Al-5Sn-2Zr-2Mo-0.25Si, Wrought, Near alpha alloy ...

eFunda: Typical Properties of Aluminum Alloys

Typical physical properties of aluminum alloys such as melting point, elastic modulus, poisson ration, thermal expansion coefficient, etc.

eFunda: Properties of Aluminum Alloy AA 2218

Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys. Al Alloy List. Wrought: ...

eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 2014

eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 2014.

Polymers: Data Sheet terms (Plastics)

Descriptive polymer selection guidelines with emphasis on reading data sheets.

eFunda: Properties of Aluminum Alloy AA 3004

eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...

eFunda Polymers: Properties of Cellulosic {cellulose acetate, sheet}

	Aluminum Alloy: AA 2014 Home \| Directory \| Career \| News \| Industrial