engineering fundamentals
Acrylonitrile-Butadiene-Styrene: 20% Glass Fiber Reinforced: Injection Molding Grade
Home | Directory | Career | News | Industrial




Materials
Design
Processes
Units
Formulas
Math
Glossary » Materials » Polymers » Acrylonitrile-Butadiene-Styrene » 20% Glass Fiber Reinforced » Injection Molding Grade
20% Glass Fiber Reinforced Injection Molding Grade ABS is a subcategory of Acrylonitrile-Butadiene-Styrene. The additative is added by weight during the manufacturing process. Its flexural modulus ranges from 650 to 800 MPa. Its tensile strength ranges from 10500 to 13000 MPa at break. Its flexural strength ranges from 14000 to 17500 MPa. Its compressive strength ranges from 13000 to 14000 MPa. Its Izod Impact strength ranges from 1.1 to 1.4 J/cm. Its elongation at break ranges from 2 to 3 %. Its hardness ranges from 85 to 98 Rockwell M. Its specific gravity ranges from 1.18 to 1.22. Its coefficient of thermal expansion ranges from 20 to 21 x 10-6/°C. Its melting temperature ranges from 100 to 110 °C. Its molding pressure ranges from 15 to 30 MPa.

Acrylonitrile-Butadiene-Styrene, also known as ABS, is a thermoplastic. Common trade names are Cycolac and Lustran. It is tough, hard and rigid. It has good chemical resistance, dimensional stability, and creep resistance. It is electroplatable and inexpensive. It has moderate mechanical strength but with a tendency to stress crack. Also, it will be degraded (dissolved) when exposed to acetone. ABS is commonly used in electronic housings, auto parts, consumer products, pipe fittings, waste pipes, computer housings (electroplated on the inside), and automotive interior and exterior trim. ABS is considered superior for its hardness, gloss, toughness, and electrical insulation properties. Although ABS plastics are used primarily for their mechanical properties, they also have good electrical properties that are fairly constant over a wide range of frequencies.
Additional Information
Other common Acrylonitrile-Butadiene-Styrene (ABS) include Extrusion Grade ABS, Flame-Retardant Grades, Molding and Extrusion ABS, ABS / PVC Flame-Retardant Grades, Molding and Extrusion ABS, ABS / PC Flame-Retardant Grades, Molding and Extrusion ABS, ABS / Nylon ABS, ABS / PC Injection Molding and Extrusion ABS, Injection Molding Grade, Heat Resistant ABS, Injection Molding Grade, Medium Impact ABS, Injection Molding Grade, High Impact ABS, Injection Molding Grade, Platable ABS, Injection Molding Grade ABS, 30% Glass Fiber Reinforced Injection Molding Grade ABS, 20% Long Glass Fiber Reinforced Injection Molding Grade ABS, 40% Long Glass Fiber Reinforced Injection Molding Grade ABS, 6% Stainless Steel Fiber EMI Shielding (conductive) ABS, 7% Stainless Steel Fiber EMI Shielding (conductive) ABS, 10% Stainless Steel Fiber EMI Shielding (conductive) ABS, 20% PAN Carbon Fiber EMI Shielding (conductive) ABS, 20% Graphite Fiber EMI Shielding (conductive) ABS, 40% Aluminum Flake EMI Shielding (conductive) ABS, and Rubber Modified Injection Molding and Extrusion Grades ABS.
Related Pages
Home  About Us  Privacy  Disclaimer  Contact  Copyright © 2012 eFunda, Inc.