engineering fundamentals
Acrylonitrile-Butadiene-Styrene: Injection Molding Grade, Heat Resistant
Home | Directory | Career | News | Industrial




Materials
Design
Processes
Units
Formulas
Math
Glossary » Materials » Polymers » Acrylonitrile-Butadiene-Styrene » Injection Molding Grade, Heat Resistant
Injection Molding Grade, Heat Resistant ABS is a subcategory of Acrylonitrile-Butadiene-Styrene. It is specially formulated to injection molding grade, heat resistant. Its elastic modulus ranges from 190 to 440 MPa. Its flexural modulus ranges from 300 to 400 MPa. Its tensile strength ranges from 4800 to 7500 MPa at break. Its flexural strength ranges from 9000 to 13000 MPa. Its compressive strength ranges from 7200 to 10000 MPa. Its Izod Impact strength ranges from 2 to 6.5 J/cm. Its elongation at break ranges from 3 to 45 %. Its hardness ranges from 100 to 115 Rockwell R. Its specific gravity ranges from 1.05 to 1.08. Its coefficient of thermal expansion ranges from 60 to 93 x 10-6/°C. Its melting temperature ranges from 110 to 125 °C. Its molding pressure ranges from 8 to 25 MPa.

Acrylonitrile-Butadiene-Styrene, also known as ABS, is a thermoplastic. Common trade names are Cycolac and Lustran. It is tough, hard and rigid. It has good chemical resistance, dimensional stability, and creep resistance. It is electroplatable and inexpensive. It has moderate mechanical strength but with a tendency to stress crack. Also, it will be degraded (dissolved) when exposed to acetone. ABS is commonly used in electronic housings, auto parts, consumer products, pipe fittings, waste pipes, computer housings (electroplated on the inside), and automotive interior and exterior trim. ABS is considered superior for its hardness, gloss, toughness, and electrical insulation properties. Although ABS plastics are used primarily for their mechanical properties, they also have good electrical properties that are fairly constant over a wide range of frequencies.
Additional Information
Other common Acrylonitrile-Butadiene-Styrene (ABS) include Extrusion Grade ABS, Flame-Retardant Grades, Molding and Extrusion ABS, ABS / PVC Flame-Retardant Grades, Molding and Extrusion ABS, ABS / PC Flame-Retardant Grades, Molding and Extrusion ABS, ABS / Nylon ABS, ABS / PC Injection Molding and Extrusion ABS, Injection Molding Grade, Medium Impact ABS, Injection Molding Grade, High Impact ABS, Injection Molding Grade, Platable ABS, Injection Molding Grade ABS, 20% Glass Fiber Reinforced Injection Molding Grade ABS, 30% Glass Fiber Reinforced Injection Molding Grade ABS, 20% Long Glass Fiber Reinforced Injection Molding Grade ABS, 40% Long Glass Fiber Reinforced Injection Molding Grade ABS, 6% Stainless Steel Fiber EMI Shielding (conductive) ABS, 7% Stainless Steel Fiber EMI Shielding (conductive) ABS, 10% Stainless Steel Fiber EMI Shielding (conductive) ABS, 20% PAN Carbon Fiber EMI Shielding (conductive) ABS, 20% Graphite Fiber EMI Shielding (conductive) ABS, 40% Aluminum Flake EMI Shielding (conductive) ABS, and Rubber Modified Injection Molding and Extrusion Grades ABS.
Related Pages
Home  About Us  Privacy  Disclaimer  Contact  Copyright © 2009 eFunda, Inc.