Materials

Design

Processes

Units

Formulas

Math

Glossary » Materials » Polymers » Epoxy » Bisphenol » Mineral Filled » Molding Compounds

Mineral Filled Molding Compounds Epoxy is a subcategory of Epoxy. The additative is added during the manufacturing process. Its flexural modulus ranges from 1400 to 2000 MPa. Its tensile strength ranges from 4000 to 10800 MPa at break. Its flexural strength ranges from 6000 to 18000 MPa. Its compressive strength ranges from 18000 to 40000 MPa. Its Izod Impact strength ranges from 0.3 to 0.5 J/cm. Its hardness ranges from 100 to 112 Rockwell M. Its specific gravity ranges from 1.6 to 2.1. Its coefficient of thermal expansion ranges from 20 to 60 x 10^-6/°C. Its molding pressure ranges from 0.1 to 3 MPa.

Epoxy is a thermoset polyadduct. Common trade names include Acme, Aerolam, Basoset, Beckopx, Conapoxy, Corlar, Cycom, DER, Desmobond, Dobeckot, Dynopon, Ecco, Epikote, Epocast, Epodite, Eprosin, Eurepox, Exatron, Grilonit, Hysol, Isochembond, Lekutherm, Lopox, Nikalet, Paraplex, Quartrex, Scotchcast, and Synthane. bisphenol Epoxy possesses many useful properties: air curable, highly fillable, low shrinkage, low susceptibility to stress formation, good adhesion to almost all materials, high tensile and vibrational strength, high heat resistance, high heat deformation resistance, high chemical attack resistance, good aging properties, good electrical and dielectrical properties, odorless, tasteless, and low flammability. Epoxy is commonly used in adhesives and reactive molding compounds. Epoxy is a copolymer, which means it is formed from two different chemicals, usually referred to as the "resin" and the "hardener". Epoxy-based materials can be used for coatings, adhesives, composite materials, mold making, and electrical insulators. When working with epoxy, vinegar is an effective and safe solvent for cleaning epoxy resins from tools, brushes, skin, and most surfaces.