Polysulfone: Poly(phenylene-Sulfone)
Home |
Directory |
Career |
News |
Industrial
|
Polysulfone: Poly(phenylene-Sulfone)
Home |
Directory |
Career |
News |
Industrial
|
|
| ||
|
| |||||||||
|
Glossary » Materials » Polymers » Polysulfone » Poly(phenylene-Sulfone) 
PSU is a subcategory of Polysulfone. Its elongation at break ranges from 60 to 120 %. Its specific gravity ranges from 1.29 to 1.3. Its molding pressure ranges from 10 to 20 MPa.
Polysulfone, also known as PSU, is a thermoplastic polycondensate. The most common trade name is Ultrason. poly(phenylene-sulfone) It is an expensive material. It is electroplatable and has high strength, good toughness, good dielectric strength, and dimensional stability. It is commonly used in electric connectors.
Additional Information
Other common Polysulfone (PSU) include Injection Molding, Flame-Retardant, Extrusion PSU, Mineral Filled PSU, Extrusion / Injection Molding Grade PSU, 20% Glass Fiber Reinforced PSU, 30% Carbon Fiber EMI Shielding (conductive) PSU, Injection Molding, Platable Grade PSU, PSU, Unfilled PSU, 10% Glass Fiber Reinforced PSU, 20% Glass Fiber Reinforced PSU, 30% Carbon Fiber EMI Shielding (conductive) PSU, Unreinforced PSU, and Mineral Filled PSU.
Related Glossary Pages
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-2/0
Glossary: Materials: Polymers: Polyetherimide: 30% Glass Fiber Reinforced Glossary: Materials: Polymers: Polyacetal: Homopolymer: Extrusion Grade Glossary: Materials: Alloys: Aluminum Alloy: Cast: 535.0 Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C85500 Glossary: Materials: Polymers: Liquid Crystal Polymer: 30% Glass Fiber Reinforced Glossary: Materials: Alloys: Steel: Tool Steel: AISI P20 Glossary: Materials: Alloys: Steel: Carbon Steel: AISI M1023 Glossary: Materials: Polymers: Polyester: Poly(ethylene-Terephthalate): 30% Glass Fiber Reinforced Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4047H Related Pages
Properties of Common Solid Materials
Further information on a specific material can be obtained by clicking the name of that particular material in the following table. ...
eFunda: Polymer (Plastic) Supplier Contact Information
Sulfone polymers, polysulfone, injection molding, platable grade. Solvay Advanced Polymers, L.L.C.. 4500 McGinnis Ferry Road. Alpharetta, GA 30005 ...
eFunda: Engineering Materials
Home page for properties of materials such as elements, alloys, polymers, and piezo ceramics.
eFunda: Overview of Polymers (Plastics)
Introduction to polymers, their molecular structures and major grouping methods.
eFunda Polymers: Properties of Sulfone polymers {polysulfone, 20 ...
eFunda Polymers: Properties of Sulfone polymers {polysulfone, 20% glass fiber reinforced}
eFunda: Polymer (Plastic) Supplier Contact Information
Ashley Polymers. 5114 Ft. Hamilton Pkwy. Brooklyn, NY 11219. Phone: 718-851-8111
eFunda: Polymers (Plastics) Sorted by Thermoplastic/Thermoset
Polysulfone, (PSU). •, Polyurethane, (PU). •, Polyvinylchloride, (PVC). •, Polyvinylidene Chloride, (PVDC). •, Thermoplastic elastomers, (TPE). ...
eFunda: Determination of Material Constants of a Lamina
Mechanical behaviors of a lamina and the determination of its material property constants.
eFunda Polymers: Listing of Polysulfone (Ultrason)
Polysulfone, also known as PSU, has been mass-produced since 1965. ... Sulfone polymers, polysulfone, 30% carbon fiber, EMI shielding (conductive). ...
eFunda Polymers: Properties of Sulfone polymers {polysulfone ...
eFunda Polymers: Properties of Sulfone polymers {polysulfone, injection molding, platable grade}
|
||||||||
