Polyvinylidene Chloride: Copolymer: Injection MoldingHome | Directory | Career | News | Industrial
Glossary » Materials » Polymers » Polyvinylidene Chloride » Copolymer » Injection Molding
Injection Molding PVDC is a subcategory of Polyvinylidene Chloride. It is specially formulated to injection molding. Its elastic modulus ranges from 55 to 95 MPa. Its flexural modulus ranges from 55 to 95 MPa. Its tensile strength ranges from 3500 to 5000 MPa at break. Its flexural strength ranges from 4200 to 6200 MPa. Its compressive strength ranges from 2000 to 2700 MPa. Its Izod Impact strength ranges from 0.4 to 1 J/cm. Its elongation at break ranges from 160 to 240 %. Its hardness ranges from 60 to 65 Rockwell M. Its specific gravity ranges from 1.65 to 1.72. Its molding pressure ranges from 5 to 30 MPa.
Polyvinylidene Chloride, also known as PVDC, is a thermoplastic polymer. Common trade names include Diofan, Ixan, and Saran. copolymer It has high hardness and good abrasion resistance. It is typically used as one of the components in a copolymer.
Other common Polyvinylidene Chloride (PVDC) include Unplasticized Barrier Film Resins PVDC, and Plasticized Barrier Film Resins PVDC.
Related Glossary Pages
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4137
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 3004
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66)
Glossary: Materials: Polymers: Polyphenylene Oxide: Alloy With Polystyrene, 30% Glass Fiber Reinforced
Glossary: Materials: Polymers: Polyamide
Glossary: Design: Oring: Material: Butyl
Glossary: Materials: Polymers: Polyamide: Nylon (PA 612): 35-45% Long Glass Fiber Reinforced
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C10100
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C63600