Thermoplastic Elastomers: Polyurethane: Polyester Compound
Home |
Directory |
Career |
News |
Industrial
|
Thermoplastic Elastomers: Polyurethane: Polyester Compound
Home |
Directory |
Career |
News |
Industrial
|
|
| ||
|
| |||||||||
|
Glossary » Materials » Polymers » Thermoplastic Elastomers » Polyurethane » Polyester Compound » Molding and Extrusion Compounds, Low and Medium Hardness 
Polyester Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE is a subcategory of Thermoplastic elastomers. The additative is added during the manufacturing process. Its flexural modulus ranges from 4000 to 6990 MPa. Its tensile strength ranges from 3300 to 8400 MPa at break. Its elongation at break ranges from 410 to 620 %. Its hardness ranges from 55 to 94 Shore A. Its specific gravity ranges from 1.17 to 1.25. Its melting temperature ranges from 120 to 160 °C. Its molding pressure ranges from 0.8 to 1.4 MPa.
Thermoplastic elastomers, also known as TPE, is a thermoplastic. polyurethane
Additional Information
Other common Thermoplastic elastomers (TPE) include Low and Medium Hardness TPE, High Hardness TPE, TPE, TPE, TPE, TPE, TPE, Psuedo-Interpenetrating Networks TPE, Psuedo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Aromatic and Aliphatic Polyether and Polyester Urethane, Unfilled Pseudo-Interpenetrating Networks TPE, Aromatic Polyether Urethane, 15% Carbon Fiber Reinforced Pseudo-Interpenetrating Networks TPE, Polyester Compound Molding and Extrusion Compounds, High Hardness TPE, Polyether Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyether Compound Molding and Extrusion Compounds, High Hardness TPE, Low and Medium Hardness TPE, and High Hardness TPE.
Related Glossary Pages
Glossary: Materials: Alloys: Steel: Stainless Steel: Custom450TM
Glossary: Materials: Alloys: Magnesium Alloy: ASTM AZ61A-F Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 9260H Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C14200 Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 6150H Glossary: Materials: Polymers: Polyacetal: Copolymer: 25% Glass Coupled Glossary: Materials: Polymers: Polyamide: Partially Aromatic: 35% Glass Fiber Reinforced, Impact Modified Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-44 Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A588 Grade E Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 40% Glass and Mineral Reinforced Related Pages
eFunda: Polymer (Plastic) Supplier Contact Information
Thermoplastic elastomers, polyurethane, polyester compound, molding and extrusion compounds, low and medium hardness ...
eFunda: Introduction to Transfer Molding
The pre-heated, uncured molding compound is placed in the transfer pot. ... Epoxy · Polyester (Unsaturated); Phenol-formaldehyde Plastic (PF, Phenolic) ...
eFunda Polymers: Properties of Thermoplastic elastomers {silicone ...
eFunda Polymers: Properties of Thermoplastic elastomers {silicone / polyurethane
Heat Treatments: Direct Hardening
Hardness is a function of the Carbon content of the steel. ... Most medium carbon steels and low alloy steels undergo transformation to 100% Martensite at ...
eFunda: Polymer (Plastic) Supplier Contact Information
American Polymers, Inc. 53 Millbrook St. P.O. Box 60398. Worcester, MA 01606 ... Ashley Polymers. 5114 Ft. Hamilton Pkwy. Brooklyn, NY 11219 ...
eFunda Polymers: Properties of Acrylic {molding and extrusion ...
Application: molding and extrusion compounds, heat resistant ... Compression Ratio, 1.2 - 2. Linear Mold Shrinkage (cm/cm), 0.002 - 0.008, D955 ...
eFunda: Introduction to Rotational Molding
The molding compound, usually a thermoplastic in the form of pellets or granules
eFunda: Listing of Common Polymers (Plastics) in Chronological Order
eFunda: Listing of Common Polymers (Plastics) in Chronological Order. ... The first volume-produced synthesized polymer resin, PF was used in early consumer ...
eFunda Polymers: Properties of Acrylic {impact modified, molding ...
Additives: impact modified. Application: molding and extrusion compounds ... Linear Mold Shrinkage (cm/cm), 0.002 - 0.008, D955 ...
eFunda Polymers: Properties of Polyethylene and ethylene ...
State: low and medium density, branched homopolymer ... Hardness, 44 - 50, Shore D, D638. Izod Impact (J/cm of notch) 1/8" thick specimen unless noted ...
|
||||||||
