Thermoplastic Elastomers: Polyurethane: Polyether Compound
Home |
Directory |
Career |
News |
Industrial
|
Thermoplastic Elastomers: Polyurethane: Polyether Compound
Home |
Directory |
Career |
News |
Industrial
|
|
| ||
|
| |||||||||
|
Glossary » Materials » Polymers » Thermoplastic Elastomers » Polyurethane » Polyether Compound » Molding and Extrusion Compounds, High Hardness 
Polyether Compound Molding and Extrusion Compounds, High Hardness TPE is a subcategory of Thermoplastic elastomers. The additative is added during the manufacturing process. Its flexural modulus ranges from 4000 to 44900 MPa. Its tensile strength ranges from 6000 to 7240 MPa at break. Its elongation at break ranges from 340 to 600 %. Its hardness ranges from 55 to 75 Shore D. Its specific gravity ranges from 1.14 to 1.21. Its melting temperature ranges from 120 to 160 °C. Its molding pressure ranges from 1 to 1.4 MPa.
Thermoplastic elastomers, also known as TPE, is a thermoplastic. polyurethane
Additional Information
Other common Thermoplastic elastomers (TPE) include Low and Medium Hardness TPE, High Hardness TPE, TPE, TPE, TPE, TPE, TPE, Psuedo-Interpenetrating Networks TPE, Psuedo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Pseudo-Interpenetrating Networks TPE, Aromatic and Aliphatic Polyether and Polyester Urethane, Unfilled Pseudo-Interpenetrating Networks TPE, Aromatic Polyether Urethane, 15% Carbon Fiber Reinforced Pseudo-Interpenetrating Networks TPE, Polyester Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Polyester Compound Molding and Extrusion Compounds, High Hardness TPE, Polyether Compound Molding and Extrusion Compounds, Low and Medium Hardness TPE, Low and Medium Hardness TPE, and High Hardness TPE.
Related Glossary Pages
Glossary: Materials: Polymers: Polyphenylene Sulfide: Unfilled
Glossary: Materials: Alloys: Steel: Stainless Steel: 17-7PH Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1021 Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A588 Grade F Glossary: Materials: Alloys: Titanium Alloy: Wrought: Ti-6Al-2Sn-4Zr-2Mo Glossary: Materials: Polymers: Polyamide: Nylon (PA 6): 50% Glass Fiber Reinforced Glossary: Materials: Polymers: Polyester: Glass Fiber Reinforced: SMC, BMC Low Density Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1074 Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C12000 Glossary: Materials: Polymers: Polyphenylene Oxide: Alloy With Polystyrene, Impact Modified Related Pages
eFunda: Glossary of Polymers (Plastics)
Common terms used in material science of polymers.
eFunda: Polymer (Plastic) Supplier Contact Information
Ashley Polymers. 5114 Ft. Hamilton Pkwy. Brooklyn, NY 11219. Phone: 718-851-8111 ... Bamberger Polymers, Inc. 2 Jericho Plaza. Jericho, NY 11753 ...
eFunda Polymers: Listing of Polyvinylidene Chloride (Diofan, Ixan ...
General properties: It has a high hardness and good abrasion resistance. -, Trade Name: Diofan, Ixan, Saran. Top of Page. Specific Grades of Polyvinylidene ...
eFunda: Overview of Polymers (Plastics)
Introduction to polymers, their molecular structures and major grouping methods.
eFunda Polymers: Properties of Thermoplastic elastomers ...
eFunda Polymers: Properties of Thermoplastic elastomers {polyurethane, polyether compound, molding and extrusion compounds, low and medium hardness}
eFunda Polymers: Listing of Thermoplastic elastomers
Thermoplastic elastomers, block copolymer of styrene and butadiene or styrene and ... Thermoplastic elastomers, silicone / polystyrene ethylene butadiene ...
eFunda: Polymer (Plastic) Supplier Contact Information
Thermoplastic elastomers, polyurethane, polyether compound, molding and extrusion compounds, low and medium hardness ...
eFunda Polymers: Properties of Acrylic {molding and extrusion ...
Application: molding and extrusion compounds, heat resistant ... Compression Ratio, 1.2 - 2. Linear Mold Shrinkage (cm/cm), 0.002 - 0.008, D955 ...
eFunda: Listing of Common Polymers (Plastics)
Polyvinylidene Chloride, (PVDC), Thermoplastic polymer. Silicone, (SI), Thermoset polycondensate. Thermoplastic elastomers, (TPE), Thermoplastic. ...
eFunda: Polymer (Plastic) Home Page
Index page for polymers. ... General Information. Polymer Home. Glossary. Material Science. Overview · Characteristics · Comparisons. Selection Criteria ...
|
||||||||
