eFunda Polymers: Properties of Polypropylene {copolymer, unfilled}
engineering fundamentals Polymer Material Properties
Directory | Career | News | Standards | Industrial | SpecSearch®
Generic (ABS, ...) Trade Name
Materials Home
General Information
Polymer Home
Glossary
Material Science
Overview
Characteristics
Comparisons
Selection Criteria
Applications
Flow Characteristics
Datasheet Primer
Major Categories
Polymer Index
History Timeline
List by Process
List by ThermoP/S
Specific Polymer
Category / Grades
Datasheet
Supplier Info
Resources
Bibliography


Login

Home Membership Store Forum Search Member Calculators

Materials
Design
Processes
Units
Formulas
Math
 
Polypropylene		  
List of Suppliers
State: copolymer
Additives: unfilled
Material Properties
 Mechanical Properties Conditions
State 1 State 2 ASTM
Elastic Modulus (MPa)   897 - 1242  tensile   D638
Flexural Modulus (MPa)   897 - 1380   23 ºC   D790
  276   94 ºC   D790
  207  122 ºC   D790
Tensile Strength (MPa)   28 - 38 at break   D638
  21 - 30 at yield   D638
Compressive Strength (MPa)
at yield or break		   25 - 56     D695
Flexural Strength (MPa)
at yield or break		   35 - 49     D790
Elongation at break (%)   200 - 500     D638
Hardness   65 - 96  Rockwell R   D638
  70 - 73  Shore D   D638
Izod Impact (J/cm of notch)
1/8" thick specimen unless noted		   0.6 - 7.4     D256A

 Thermal Properties Conditions
Pressure State ASTM
Coef of Thermal Expansion (10-6/ºC)   68 - 95     D696
Deflection Temperature (ºC)   85 - 105   0.46 MPa   D648
  55 - 60   1.82 MPa   D648
Thermal Conductivity (W/m-ºC)  0.146 - 0.167     C177

 Physical & Electrical Properties Conditions
State ASTM
Specific Gravity  0.89 - 0.905   D792
Water Absorption (% weight increase)  0.03  after 24 hrs D570
Dielectric Strength (V/mil);
1/8" thick specimen unless noted		   600   D149

 Processing Properties Conditions
Type ASTM
Melt Flow (gm/10 min)  0.6 - 100   D1238
Melting Temperature (ºC)   -20  Tg, amorphous  
Melting Temperature (ºC)  150 - 175  Tm, crystalline  
Processing Temperature (ºC)  191 - 288  injection molding  
 205 - 260  extrusion  
Molding Pressure (MPa)   69 - 138    
Compression Ratio  2 - 2.4    
Linear Mold Shrinkage (cm/cm)  0.01 - 0.025   D955

Top of Page

Suppliers
A. Schulman Akron, OH  800-662-7203
American Polymers, Inc. Worcester, MA   
Amoco Chemicals Lisle, IL  800-621-4567
Aristech Chemical Corp. Pittsburgh, PA   
Bamberger Polymers, Inc. Jericho, NY   
ComAlloy International Co. Nashville, TN   
Dow Plastics Midland, MI  800-441-4369
Epsilon Products Co. Marcus Hook, PA  800-522-7509
Equistar Chemicals LP Houston, TX  888-777-0232
Exxon Chemical Co. Houston, TX  800-231-6633
Federal Plastics Corp. Cranford, NJ  800-541-4424
Ferro Corp. Cleveland, OH   
Fina Oil & Chemical Co. Dallas, TX  800-344-3462
Huntsman Corp. Salt Lake City, UT  800-421-2411
M.A. Industries, Inc. Peachtree City, GA  800-241-8250
Montell North America Wilmington, DE   
Network Polymers, Inc. Akron, OH  888-437-4674
NOVA Chemicals, Ltd. Calgary, Alberta T2P 5C6, Canada   
Phillips Chemical Co. Bartlesville, OK  800-537-3746
R.S.G. Polymers Corp. Stony Brook, NY   
Shuman Plastics, Inc. Depew, NY   
Solvay Polymers, Inc. Houston, TX  800-231-6313
Spartech Polycom Washington, PA  800-538-3149
Union Carbide Corp. Danbury, CT  800-335-8550
Washington Penn Plastic Co. Washington, PA   

Top of Page

Glossary
Home  Membership  About Us  Privacy  Disclaimer  Contact  Advertise

Copyright © 2009 eFunda, Inc.