Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

more free magazines
Steel S Section I-Beams

The I-Beams are identified by:
S DEPTH (inches) × WEIGHT PER UNIT LENGTH (pound force per foot)
For Example: S18 × 54.7 is an I-Beam with a Depth of 18 inches and having a Nominal Weight per Foot of 54.7 lbf/ft.
Check all the I-beams you would like to see properties for and then click GET.
 
ALL     

S24 × ___ S20 × ___ S18 × ___ S15 × ___ S12 × ___
S24 × 121 S20 × 96 S18 × 70 S15 × 50 S12 × 50
S24 × 106 S20 × 86 S18 × 54.7 S15 × 42.9 S12 × 40.8
S24 × 100 S20 × 75 S12 × 35
S24 × 90 S20 × 66 S12 × 31.8
S24 × 80

S10 × ___ S8 × ___ S7 × ___ S6 × ___ S5 × ___
S10 × 35 S8 × 23 S7 × 20 S6 × 17.25 S5 × 14.75
S10 × 25.4 S8 × 18.4 S7 × 15.3 S6 × 12.5 S5 × 10

S4 × ___ S3 × ___
S4 × 9.5 S3 × 7.5
S4 × 7.7 S3 × 5.7
Glossary