| 355.0 | |
![]() | |
| Conditions | Tensile Properties | ||
| T (°C) | Treatment | ||
| 25 | T51 (permanent mold casting) | Tensile Strength (MPa) | 210 |
| Yield Strength (MPa) | 165 | ||
| Elongation (%) | 2.0 | ||
| Reduction in Area (%) | |||
| 25 | T51 (sand casting) | Tensile Strength (MPa) | 195 |
| Yield Strength (MPa) | 160 | ||
| Elongation (%) | 1.5 | ||
| Reduction in Area (%) | |||
| 25 | T6 (permanent mold casting) | Tensile Strength (MPa) | 290 |
| Yield Strength (MPa) | 190 | ||
| Elongation (%) | 4.0 | ||
| Reduction in Area (%) | |||
| 25 | T6 (sand casting) | Tensile Strength (MPa) | 240 |
| Yield Strength (MPa) | 175 | ||
| Elongation (%) | 3.0 | ||
| Reduction in Area (%) | |||
| 25 | T61 (sand casting) | Tensile Strength (MPa) | 270 |
| Yield Strength (MPa) | 240 | ||
| Elongation (%) | 1.0 | ||
| Reduction in Area (%) | |||
| 25 | T62 (permanent mold casting) | Tensile Strength (MPa) | 310 |
| Yield Strength (MPa) | 280 | ||
| Elongation (%) | 1.5 | ||
| Reduction in Area (%) | |||
| 25 | T7 (sand casting) | Tensile Strength (MPa) | 265 |
| Yield Strength (MPa) | 250 | ||
| Elongation (%) | 0.5 | ||
| Reduction in Area (%) | |||
| 25 | T7 (permanent mold casting) | Tensile Strength (MPa) | 280 |
| Yield Strength (MPa) | 210 | ||
| Elongation (%) | 2.0 | ||
| Reduction in Area (%) | |||
| 25 | T71 (permanent mold casting) | Tensile Strength (MPa) | 250 |
| Yield Strength (MPa) | 215 | ||
| Elongation (%) | 3.0 | ||
| Reduction in Area (%) | |||
| 25 | T71 (sand casting) | Tensile Strength (MPa) | 175 |
| Yield Strength (MPa) | 200 | ||
| Elongation (%) | 1.5 | ||
| Reduction in Area (%) | |||
















