Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

more free publications
Aluminum Channels

The Channels are identified by:
DEPTH (inches) × WEIGHT PER UNIT LENGTH (pound force per foot)
For Example: 12 × 11.822 is an I-Beam 12 inches deep and weighing 11.822 lbs/ft.
Check all the channels you would like to see properties for and then click GET.

12 × ___ 10 × ___ 9 × ___ 8 × ___ 7 × ___
12 × 11.822 10 × 8.36 9 × 6.97 8 × 5.789 7 × 4.715
12 × 8.274 10 × 6.136 9 × 4.983 8 × 4.147 7 × 3.205

6 × ___ 5 × ___ 4 × ___ 3 × ___ 2 × ___
6 × 4.03 5 × 3.089 4 × 2.331 3 × 1.597 2 × 1.071
6 × 2.834 5 × 2.212 4 × 1.738 3 × 1.135 2 × 0.577

ALL     
Glossary
Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.