Aluminum Ibeams Search Page

Optimize your designs, reduce machining time, and lower your costs.

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

more free publications

Aluminum I-Beams

The I-Beams are identified by:
DEPTH (inches) × WEIGHT PER UNIT LENGTH (pound force per foot)

For Example: 12 × 14.292 is an I-Beam 12 inches deep and weighing 14.292 lbs/ft.

Glossary

Optimize your designs, reduce machining time, and lower your costs.

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Guide for those interested in becoming a mechanical engineer. Includes qualifications, pay, and job duties.

Check all the I-Beams you would like to see properties for and then click GET.

12 × ___	10 × ___	9 × ___	8 × ___	7 × ___
12.00 × 14.292	10.00 × 10.286	9.00 × 8.361	8.00 × 7.023	7.00 × 5.800
12.00 × 11.672	10.00 × 8.646		8.00 × 6.181	6.00 × 4.692

6 × ___	5 × ___	4 × ___	3 × ___
6.00 × 4.030	5.00 × 3.700	4.00 × 2.793	3.00 × 2.030
		4.00 × 2.311	3.00 × 1.637

ALL