Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

World Pumps

Major news, innovation and real-life applications for pumps and ancillary equipment.

Chemical Engineering

The industry gateway for chemical engineering and plant operations.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free magazines
 
Nominal Thread SizeCovered Range
0-80 UNF to ¼-56 UNS Nominal thread sizes from 0-80 UNF to ¼-56 UNS
5/16-18 UNC to 9/16 -32 UN Nominal thread sizes from 5/16-18 UNC to 9/16 -32 UN
5/8-11 UNC to 7/8-32 UN Nominal thread sizes from 5/8-11 UNC to 7/8-32 UN
15/16-12 UN to 1 3/16-28 UN Nominal thread sizes from 15/16-12 UN to 1 3/16-28 UN
1 1/4-7 UNC to 1 9/16-20 UN Nominal thread sizes from 1 1/4-7 UNC to 1 9/16-20 UN
1 5/8-6 UN to 1 15/16-20 UN Nominal thread sizes from 1 5/8-6 UN to 1 15/16-20 UN
2-4½ UNC to 2¾-20 UN Nominal thread sizes from 2-4½ UNC to 2¾-20 UN
2 7/8-6 UN to 4-16 UN Nominal thread sizes from 2 7/8-6 UN to 4-16 UN
 
External Thread /Internal Thread
  Nominal Size, TPI, Series Class Allowance Maxa Major
Max Minor
Min Major
Min Minor
Min b Maxa Pitch Min Pitch UNRc Minor Dia
Major Dia(Min)
a For Class 2A threads with coating (plating) the max. is increased by the allowance, to the basic size. This is the same value as Class 3A.
b For uncoated hot-rolled, but not standard fasteners with cold rolled threads
c UN series external thread, Max.Diameter = Basic - Allowance, for Class 1A and 2A
  = Basic for Class 3A
Next
Glossary