CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

more free publications
Diagrams and Calculator Inputs
 Thickness of Angle Beam h  
 Radius of Inside Corner r  
 Wing of Angle Beam a >> h
 Hight of Angle Beam H a + h >> h

Stress Concentration Factor

Input data

h = 10 mm
r = 10 mm
Answer
 1.58
 
 
Note that the stress concentration factors are calculated from experimental data using curve fitting, so only two decimal places are given.
CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.