Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

more free publications
List Recent Topics | Start a New Topic

Message No. 26436, Started by jainexsteelimpex on 12/26/21

So wheeling this weekend, I blew out the drivers hard brake line. Rusty and brittle so I am going to replace them all. Pre-formed set at rock auto is about $99 and I figure Ill replace the rubber lines as well (where should I get those?).

Is it as simple (and time-consuming) as working in the new one and cutting out the old one?

I found stainless steel for twice the price, but since the originals lasted 24 years, that would be good enough again.

How long does it take to do this job and should I be replacing anything else at the same time?

Reply | Start a New Topic | List Recent Topics
 

Follow-up Messages (1)
need it too 
No. 26815, Posted by barbaramorrigan on 08/29/22, 06:55 PST.
Glossary
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Negotiate Your Salary

Learn the best principles to negotiate the salary you deserve!

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.