Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

more free magazines
Glossary » Design » Oring » Chemical » Ammonium Chloride

Common O-Ring materials that are SUITABLE for dynamic and static seal in the environment containing Ammonium Chloride include

  • Aflas: Aflas is the tradename for a unique fluoroelastomer based upon an alternating copolymer of tetrafluoroethylene and propylene ("TFE/P").
  • Butyl: Butyl (IIR) is a synthetic rubber, a copolymer of isobutylene and isoprene.
  • Chemraz: Chemraz combines the resilience and sealing force of an elastomer with chemical resistance approaching that of PTFE.
  • Epichlorohydrin: Epichlorohydrin (ECO) has properties similar to nitrile rubber but with better heat and oil resistance as well as better low temperature flexibility.
  • Ethylene-Propylene: Ethylene-propylene (EP) is a copolymer of ethylene and propylene.
  • Fluorocarbon: Fluorocarbon elastomer (FKM) material is also known by its tradename VITON or Fluorel.
  • Hypalon: Hypalon is the traenme of a clasof Chlorosulfonated Polyethylene (CSM).
  • Natural Rubber: Natural rubber is a product coagulated from the latex of the rubber tree, hevea brasiliensis.
  • Neoprene: Neoprene is a homopolymer of chlorobutadiene (CR).
  • Hydrogenated Nitrile: Hydrogenated Nitrile Butadiene Rubber (HNBR) is also known as Highly Saturated Nitrile (HSN).
  • Polyacrylate: Polyacrylate (ACM) is a class of copolymer of ethyl and acrylates.
  • Polysulfide: Polysulfide was one of the first commercial synthetic elastomers.
  • Styrene Butadiene: Styrene-Butadiene rubber (SBR) has properties similar to those of natural rubber.
  • Virgin Teflon: Because Teflon is a hard plastic rather than a stretchy elastomer, it is uncommon to see an o-ring that is made entirely of Teflon.
  • Vamac: Vamac is the tradename of a class of Ethylene Acrylic elastomer (AEM).

The O-Ring materials below are USUALLY SUITABLE for static seal in the environment containing Ammonium Chloride.

  • Buna-N (Nitrile): Buna-N, also known as Nitrile rubber, is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene.
  • Millable Polyurethane: Millable Polyurethane rubber is made from both polyester and polyether polyols.

The following O-Ring materials are SOMETIMES OK for static seal but not for dynamic seal in the environment containing Ammonium Chloride.

  • Silicone: Silicone is a semi-organic elastomer with outstanding resistance to extremes of temperature.

O-Ring materials that are NOT SUITABLE for using in the environment containing Ammonium Chloride include

  • Fluorosilicone: Fluorosilicone combines excellent low-temperature performance of silicone with improved chemical resistance.
Additional Information

There is not enough data to determine whether the following common O-Ring materials are suitable for using in the environment containing Ammonium Chloride or not.

  • Kalrez: Kalrez is the tradename for a perfluoroelastomeric material.
  • Cast Polyurethane: Cast Polyurethane exhibits outstanding tensile strength and abrasion resistance in comparison with other elastomers.
Related Pages