Laser Focus World

Semiconductors, medical equipment, lasers, optics and aviation and aerospace.

Design-2-Part

How OEM's can make their parts better, faster, and more efficient.

Quality Magazine

Techniques to improve quality on the shop floor and in manufacturing planning.

World Pumps

Major news, innovation and real-life applications for pumps and ancillary equipment.

more free magazines
Glossary » Design » Oring » Chemical » Iso Octane

Common O-Ring materials that are SUITABLE for dynamic and static seal in the environment containing Iso Octane include

  • Aflas: Aflas is the tradename for a unique fluoroelastomer based upon an alternating copolymer of tetrafluoroethylene and propylene ("TFE/P").
  • Buna-N (Nitrile): Buna-N, also known as Nitrile rubber, is a synthetic rubber copolymer of acrylonitrile (ACN) and butadiene.
  • Chemraz: Chemraz combines the resilience and sealing force of an elastomer with chemical resistance approaching that of PTFE.
  • Ethylene-Propylene: Ethylene-propylene (EP) is a copolymer of ethylene and propylene.
  • Fluorocarbon: Fluorocarbon elastomer (FKM) material is also known by its tradename VITON or Fluorel.
  • Hypalon: Hypalon is the traenme of a clasof Chlorosulfonated Polyethylene (CSM).
  • Neoprene: Neoprene is a homopolymer of chlorobutadiene (CR).
  • Hydrogenated Nitrile: Hydrogenated Nitrile Butadiene Rubber (HNBR) is also known as Highly Saturated Nitrile (HSN).
  • Polyacrylate: Polyacrylate (ACM) is a class of copolymer of ethyl and acrylates.
  • Styrene Butadiene: Styrene-Butadiene rubber (SBR) has properties similar to those of natural rubber.
  • Virgin Teflon: Because Teflon is a hard plastic rather than a stretchy elastomer, it is uncommon to see an o-ring that is made entirely of Teflon.
  • Vamac: Vamac is the tradename of a class of Ethylene Acrylic elastomer (AEM).

The O-Ring materials below are USUALLY SUITABLE for static seal in the environment containing Iso Octane.

  • Fluorosilicone: Fluorosilicone combines excellent low-temperature performance of silicone with improved chemical resistance.
  • Natural Rubber: Natural rubber is a product coagulated from the latex of the rubber tree, hevea brasiliensis.
  • Cast Polyurethane: Cast Polyurethane exhibits outstanding tensile strength and abrasion resistance in comparison with other elastomers.

O-Ring materials that are NOT SUITABLE for using in the environment containing Iso Octane include

  • Butyl: Butyl (IIR) is a synthetic rubber, a copolymer of isobutylene and isoprene.
  • Epichlorohydrin: Epichlorohydrin (ECO) has properties similar to nitrile rubber but with better heat and oil resistance as well as better low temperature flexibility.
  • Kalrez: Kalrez is the tradename for a perfluoroelastomeric material.
  • Millable Polyurethane: Millable Polyurethane rubber is made from both polyester and polyether polyols.
  • Silicone: Silicone is a semi-organic elastomer with outstanding resistance to extremes of temperature.
Additional Information

There is not enough data to determine whether the following common O-Ring materials are suitable for using in the environment containing Iso Octane or not.

  • Polysulfide: Polysulfide was one of the first commercial synthetic elastomers.
Related Pages