Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.

more free publications
Glossary » Beams » Simply Supported » Uniformly Distributed Load » Two Equal Spans » Wide Flange Steel I Beam » W12 × 279
Wide Flange Steel I Beam | Single Span | Two Equal Spans | Three Equal Spans | Four Equal Spans

For a simply supported beam in two equal spans, we compute the displacement at the middle of each span w_mid and the maximum normal stress stress_max occuring at the center support of the beam.
The tabulated data listed in this page are calculated based on the area moment of inertia (Ixx = 3110 in4) for the W12 × 279 Wide Flange Steel I Beam and the typical Young's modulus (E = 3.046 × 107 psi) of steels. Note that the typical yielding stress Yield of steels can range from 1.015 × 104 to 2.970 × 105 psi. The purpose of this page is to give a rough estimation of the load-bearing capacity of this particular beam, rather than a guideline for designing actual building structures. Please check your local building codes for regulatory requirements.
Note: The weight of the beam itself is not included in the calculation.
L = 3 ft
L = 5 ft
L = 10 ft
L = 15 ft
L = 20 ft
L = 25 ft
L = 30 ft
L = 40 ft
L = 50 ft
L = 60 ft
L = 70 ft
L = 80 ft
L = 90 ft
L = 100 ft
L = 125 ft
L = 150 ft
  
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 3.00 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 2.15 × 10-6 9.60
300 2.31 × 10-6 10.3
400 3.08 × 10-6 13.8
500 3.85 × 10-6 17.2
600 4.62 × 10-6 20.6
700 5.39 × 10-6 24.1
800 6.16 × 10-6 27.5
900 6.93 × 10-6 31.0
1000 7.70 × 10-6 34.4
2000 1.54 × 10-5 68.8
3000 2.31 × 10-5 103
4000 3.08 × 10-5 138
5000 3.85 × 10-5 172
6000 4.62 × 10-5 206
7000 5.39 × 10-5 241
8000 6.16 × 10-5 275
9000 6.93 × 10-5 310
1.00 × 104 7.70 × 10-5 344
2.00 × 104 1.54 × 10-4 688
3.00 × 104 2.31 × 10-4 1030
4.00 × 104 3.08 × 10-4 1380
5.00 × 104 3.85 × 10-4 1720
6.00 × 104 4.62 × 10-4 2060
7.00 × 104 5.39 × 10-4 2410
8.00 × 104 6.16 × 10-4 2750
9.00 × 104 6.93 × 10-4 3100
1.00 × 105 7.70 × 10-4 3440
2.00 × 105 0.00154 6880
3.00 × 105 0.00231 1.03 × 104
4.00 × 105 0.00308 1.38 × 104
5.00 × 105 0.00385 1.72 × 104
6.00 × 105 0.00462 2.06 × 104
7.00 × 105 0.00539 2.41 × 104
8.00 × 105 0.00616 2.75 × 104
9.00 × 105 0.00693 3.10 × 104
1.00 × 106 0.00770 3.44 × 104
2.00 × 106 0.0154 6.88 × 104
3.00 × 106 0.0231 1.03 × 105
4.00 × 106 0.0308 1.38 × 105
5.00 × 106 0.0385 1.72 × 105
6.00 × 106 0.0462 2.06 × 105
7.00 × 106 0.0539 2.41 × 105
8.00 × 106 0.0616 2.75 × 105
8.63 × 106 0.0665 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 5.00 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 1.66 × 10-5 26.7
300 1.78 × 10-5 28.7
400 2.38 × 10-5 38.2
500 2.97 × 10-5 47.8
600 3.56 × 10-5 57.3
700 4.16 × 10-5 66.9
800 4.75 × 10-5 76.4
900 5.34 × 10-5 86.0
1000 5.94 × 10-5 95.6
2000 1.19 × 10-4 191
3000 1.78 × 10-4 287
4000 2.38 × 10-4 382
5000 2.97 × 10-4 478
6000 3.56 × 10-4 573
7000 4.16 × 10-4 669
8000 4.75 × 10-4 764
9000 5.34 × 10-4 860
1.00 × 104 5.94 × 10-4 956
2.00 × 104 0.00119 1910
3.00 × 104 0.00178 2870
4.00 × 104 0.00238 3820
5.00 × 104 0.00297 4780
6.00 × 104 0.00356 5730
7.00 × 104 0.00416 6690
8.00 × 104 0.00475 7640
9.00 × 104 0.00534 8600
1.00 × 105 0.00594 9560
2.00 × 105 0.0119 1.91 × 104
3.00 × 105 0.0178 2.87 × 104
4.00 × 105 0.0238 3.82 × 104
5.00 × 105 0.0297 4.78 × 104
6.00 × 105 0.0356 5.73 × 104
7.00 × 105 0.0416 6.69 × 104
8.00 × 105 0.0475 7.64 × 104
9.00 × 105 0.0534 8.60 × 104
1.00 × 106 0.0594 9.56 × 104
2.00 × 106 0.119 1.91 × 105
3.00 × 106 0.178 2.87 × 105
3.11 × 106 0.185 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 10.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 2.65 × 10-4 107
300 2.85 × 10-4 115
400 3.80 × 10-4 153
500 4.75 × 10-4 191
600 5.70 × 10-4 229
700 6.65 × 10-4 268
800 7.60 × 10-4 306
900 8.55 × 10-4 344
1000 9.50 × 10-4 382
2000 0.00190 764
3000 0.00285 1150
4000 0.00380 1530
5000 0.00475 1910
6000 0.00570 2290
7000 0.00665 2680
8000 0.00760 3060
9000 0.00855 3440
1.00 × 104 0.00950 3820
2.00 × 104 0.0190 7640
3.00 × 104 0.0285 1.15 × 104
4.00 × 104 0.0380 1.53 × 104
5.00 × 104 0.0475 1.91 × 104
6.00 × 104 0.0570 2.29 × 104
7.00 × 104 0.0665 2.68 × 104
8.00 × 104 0.0760 3.06 × 104
9.00 × 104 0.0855 3.44 × 104
1.00 × 105 0.0950 3.82 × 104
2.00 × 105 0.190 7.64 × 104
3.00 × 105 0.285 1.15 × 105
4.00 × 105 0.380 1.53 × 105
5.00 × 105 0.475 1.91 × 105
6.00 × 105 0.570 2.29 × 105
7.00 × 105 0.665 2.68 × 105
7.77 × 105 0.738 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 15.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.00134 240
300 0.00144 258
400 0.00192 344
500 0.00241 430
600 0.00289 516
700 0.00337 602
800 0.00385 688
900 0.00433 774
1000 0.00481 860
2000 0.00962 1720
3000 0.0144 2580
4000 0.0192 3440
5000 0.0241 4300
6000 0.0289 5160
7000 0.0337 6020
8000 0.0385 6880
9000 0.0433 7740
1.00 × 104 0.0481 8600
2.00 × 104 0.0962 1.72 × 104
3.00 × 104 0.144 2.58 × 104
4.00 × 104 0.192 3.44 × 104
5.00 × 104 0.241 4.30 × 104
6.00 × 104 0.289 5.16 × 104
7.00 × 104 0.337 6.02 × 104
8.00 × 104 0.385 6.88 × 104
9.00 × 104 0.433 7.74 × 104
1.00 × 105 0.481 8.60 × 104
2.00 × 105 0.962 1.72 × 105
3.00 × 105 1.44 2.58 × 105
3.45 × 105 1.66 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 20.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.00424 427
300 0.00456 459
400 0.00608 612
500 0.00760 764
600 0.00912 917
700 0.0106 1070
800 0.0122 1220
900 0.0137 1380
1000 0.0152 1530
2000 0.0304 3060
3000 0.0456 4590
4000 0.0608 6120
5000 0.0760 7640
6000 0.0912 9170
7000 0.106 1.07 × 104
8000 0.122 1.22 × 104
9000 0.137 1.38 × 104
1.00 × 104 0.152 1.53 × 104
2.00 × 104 0.304 3.06 × 104
3.00 × 104 0.456 4.59 × 104
4.00 × 104 0.608 6.12 × 104
5.00 × 104 0.760 7.64 × 104
6.00 × 104 0.912 9.17 × 104
7.00 × 104 1.06 1.07 × 105
8.00 × 104 1.22 1.22 × 105
9.00 × 104 1.37 1.38 × 105
1.00 × 105 1.52 1.53 × 105
1.94 × 105 2.95 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 25.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.0104 667
300 0.0111 717
400 0.0148 956
500 0.0186 1190
600 0.0223 1430
700 0.0260 1670
800 0.0297 1910
900 0.0334 2150
1000 0.0371 2390
2000 0.0742 4780
3000 0.111 7170
4000 0.148 9560
5000 0.186 1.19 × 104
6000 0.223 1.43 × 104
7000 0.260 1.67 × 104
8000 0.297 1.91 × 104
9000 0.334 2.15 × 104
1.00 × 104 0.371 2.39 × 104
2.00 × 104 0.742 4.78 × 104
3.00 × 104 1.11 7.17 × 104
4.00 × 104 1.48 9.56 × 104
5.00 × 104 1.86 1.19 × 105
6.00 × 104 2.23 1.43 × 105
7.00 × 104 2.60 1.67 × 105
8.00 × 104 2.97 1.91 × 105
9.00 × 104 3.34 2.15 × 105
1.00 × 105 3.71 2.39 × 105
1.24 × 105 4.61 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 30.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.0215 960
300 0.0231 1030
400 0.0308 1380
500 0.0385 1720
600 0.0462 2060
700 0.0539 2410
800 0.0616 2750
900 0.0693 3100
1000 0.0770 3440
2000 0.154 6880
3000 0.231 1.03 × 104
4000 0.308 1.38 × 104
5000 0.385 1.72 × 104
6000 0.462 2.06 × 104
7000 0.539 2.41 × 104
8000 0.616 2.75 × 104
9000 0.693 3.10 × 104
1.00 × 104 0.770 3.44 × 104
2.00 × 104 1.54 6.88 × 104
3.00 × 104 2.31 1.03 × 105
4.00 × 104 3.08 1.38 × 105
5.00 × 104 3.85 1.72 × 105
6.00 × 104 4.62 2.06 × 105
7.00 × 104 5.39 2.41 × 105
8.00 × 104 6.16 2.75 × 105
8.63 × 104 6.65 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 40.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.0679 1710
300 0.0730 1830
400 0.0973 2450
500 0.122 3060
600 0.146 3670
700 0.170 4280
800 0.195 4890
900 0.219 5500
1000 0.243 6120
2000 0.486 1.22 × 104
3000 0.730 1.83 × 104
4000 0.973 2.45 × 104
5000 1.22 3.06 × 104
6000 1.46 3.67 × 104
7000 1.70 4.28 × 104
8000 1.95 4.89 × 104
9000 2.19 5.50 × 104
1.00 × 104 2.43 6.12 × 104
2.00 × 104 4.86 1.22 × 105
3.00 × 104 7.30 1.83 × 105
4.00 × 104 9.73 2.45 × 105
4.86 × 104 11.8 2.97 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 50.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.166 2670
300 0.178 2870
400 0.238 3820
500 0.297 4780
600 0.356 5730
700 0.416 6690
800 0.475 7640
900 0.534 8600
1000 0.594 9560
2000 1.19 1.91 × 104
3000 1.78 2.87 × 104
4000 2.38 3.82 × 104
5000 2.97 4.78 × 104
6000 3.56 5.73 × 104
7000 4.16 6.69 × 104
8000 4.75 7.64 × 104
9000 5.34 8.60 × 104
1.00 × 104 5.94 9.56 × 104
2.00 × 104 11.9 1.91 × 105
2.67 × 104 15.9 2.55 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 60.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.344 3840
300 0.369 4130
400 0.493 5500
500 0.616 6880
600 0.739 8260
700 0.862 9630
800 0.985 1.10 × 104
900 1.11 1.24 × 104
1000 1.23 1.38 × 104
2000 2.46 2.75 × 104
3000 3.69 4.13 × 104
4000 4.93 5.50 × 104
5000 6.16 6.88 × 104
6000 7.39 8.26 × 104
7000 8.62 9.63 × 104
8000 9.85 1.10 × 105
9000 11.1 1.24 × 105
1.00 × 104 12.3 1.38 × 105
1.29 × 104 15.9 1.77 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 70.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 0.636 5230
300 0.684 5620
400 0.913 7490
500 1.14 9360
600 1.37 1.12 × 104
700 1.60 1.31 × 104
800 1.83 1.50 × 104
900 2.05 1.69 × 104
1000 2.28 1.87 × 104
2000 4.56 3.75 × 104
3000 6.84 5.62 × 104
4000 9.13 7.49 × 104
5000 11.4 9.36 × 104
6000 13.7 1.12 × 105
6950 15.9 1.30 × 105
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 80.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 1.09 6830
300 1.17 7340
400 1.56 9790
500 1.95 1.22 × 104
600 2.34 1.47 × 104
700 2.72 1.71 × 104
800 3.11 1.96 × 104
900 3.50 2.20 × 104
1000 3.89 2.45 × 104
2000 7.78 4.89 × 104
3000 11.7 7.34 × 104
4000 15.6 9.79 × 104
4070 15.9 9.96 × 104
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 90.0 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 1.74 8640
300 1.87 9290
400 2.49 1.24 × 104
500 3.12 1.55 × 104
600 3.74 1.86 × 104
700 4.36 2.17 × 104
800 4.99 2.48 × 104
900 5.61 2.79 × 104
1000 6.23 3.10 × 104
2000 12.5 6.19 × 104
2540 15.9 7.87 × 104
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 100 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 2.65 1.07 × 104
300 2.85 1.15 × 104
400 3.80 1.53 × 104
500 4.75 1.91 × 104
600 5.70 2.29 × 104
700 6.65 2.68 × 104
800 7.60 3.06 × 104
900 8.55 3.44 × 104
1000 9.50 3.82 × 104
1670 15.9 6.38 × 104
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 125 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 6.47 1.67 × 104
300 6.96 1.79 × 104
400 9.28 2.39 × 104
500 11.6 2.99 × 104
600 13.9 3.58 × 104
683 15.9 4.08 × 104
Steel I Beam: W12 × 279 (Wide Flange 12 inch tall × 279 lbf/ft)
L = 150 ft
P (lbf/ft) w_max (in) stress_max (psi)
279 13.4 2.40 × 104
300 14.4 2.58 × 104
330 15.9 2.83 × 104
Additional Information
Related Pages
Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Selecting the Right 3D Printer

Discover how to choose the right 3D printer for your needs and the key performance attributes to consider.