Glossary » Materials » Alloys » Aluminum Alloy » Cast » 201.0
201.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 93.75% Aluminum (Al), 4.60% Copper (Cu), 0.35% Magnesium (Mg), 0.35% Manganese (Mn), 0.7% Silver (Ag), and 0.25% Titanium (Ti). It is usually used in sand casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information
Other common Cast Aluminum Alloys include 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 319.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, A443.0, B443.0, C443.0, 514.0, 518.0, 520.0, 535.0, A535.0, B535.0, 712.0, 713.0, 771.0, and 850.0.
Related Glossary Pages
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Polymers: Polysulfone: Poly(ethersulfone): Unfilled
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C85500
Glossary: Materials: Polymers: Polyimide
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C12000
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Polymers: Polycarbonate: 10-15% PTFE
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Polymers: Polysulfone: Poly(ethersulfone): Unfilled
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C85500
Glossary: Materials: Polymers: Polyimide
Glossary: Materials: Alloys: Copper Alloy: Wrought: UNS C12000
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Polymers: Polycarbonate: 10-15% PTFE
Related Pages
eFunda: Listing of Wrought Aluminum Alloys
Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys. Wrought Alloys. Al Alloy List. Wrought: ...
eFunda: Properties of Aluminum Alloy AA 5154
eFunda: Properties of Aluminum Alloy AA 5154. ... Sponsored Links. AA 5154. Category, Aluminum Alloy. Class, Wrought. Composition. Element, Weight % ...
eFunda: Typical Properties of Aluminum Alloys
Typical physical properties of aluminum alloys such as melting point, elastic modulus, poisson ration, thermal expansion coefficient, etc.
eFunda Polymers: Properties of Polyamide {nylon (PA 6), cast, Type ...
eFunda Polymers: Properties of Polyamide {nylon (PA 6), cast, Type 6 / 612 blend}
Sand Casting: Allowance
Pattern finish allowance and wall thickness for various metals such as Aluminum, Copper Alloys, Cast Iron, Nickel Alloys, Steel, Magnesium Alloys, ...
Centrifugal Casting
Centrifugal casting is a casting process by which axi-symmetrical parts are made. ... Plaster Mold Casting · Powder Metallurgy · Sand Casting ...
eFunda: Properties of Alloy Steel Alloy Steel 201.0
eFunda: Properties of Alloy Steel Alloy Steel 201.0.
eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043
eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043.
eFunda: Listing of Cast Alumnium Alloys 3xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 3xx.0 Aluminum Alloys.
Die Casting
On the other hand, pure Aluminum is rarely cast due to high shrinkage, and susceptibility to hot ... Aluminum is cast at a temperature of 650 ºC (1200 ºF). ...
