Glossary » Materials » Alloys » Aluminum Alloy » Cast » 319.0

319.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 90.50% Aluminum (Al), 3.50% Copper (Cu), and 6.00% Silicon (Si). It is usually used in sand casting and permanent mold casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information

Other common Cast Aluminum Alloys include 201.0, 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, A443.0, B443.0, C443.0, 514.0, 518.0, 520.0, 535.0, A535.0, B535.0, 712.0, 713.0, 771.0, and 850.0.
Related Glossary Pages

Glossary: Materials: Polymers: Polyethylene: Low and Medium Density, Linear Copolymer
Glossary: Materials: Alloys: Steel: Tool Steel: AISI M47
Glossary: Materials: Polymers: Polyester: Poly(cyclohexylene-Methylene-Terephthalate): 30% Glass Fiber Reinforced
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C81100
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66)
Glossary: Materials: Polymers: Polycarbonate: 30% PTFE: Lubricated
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-37
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 50% PAN Carbon Fiber: EMI Shielding (conductive)
Glossary: Materials: Polymers: Polyester: Glass Fiber Reinforced, Preformed Chopped Roving
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 5120H
Glossary: Materials: Alloys: Steel: Tool Steel: AISI M47
Glossary: Materials: Polymers: Polyester: Poly(cyclohexylene-Methylene-Terephthalate): 30% Glass Fiber Reinforced
Glossary: Materials: Alloys: Copper Alloy: Cast: UNS C81100
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66)
Glossary: Materials: Polymers: Polycarbonate: 30% PTFE: Lubricated
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-37
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 50% PAN Carbon Fiber: EMI Shielding (conductive)
Glossary: Materials: Polymers: Polyester: Glass Fiber Reinforced, Preformed Chopped Roving
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 5120H
Related Pages

eFunda: Listing of Magnesium Alloys for Castings
Name, Processes and Available Forms. ASTM AM100A-T61, sand casting, permanent mold casting. ASTM AM60A-F, die casting. ASTM AS41A-F, die casting ...
Die Casting
On the other hand, pure Aluminum is rarely cast due to high shrinkage, and susceptibility to hot ... Aluminum is cast at a temperature of 650 ºC (1200 ºF). ...
Plaster Mold Casting
In plaster mold casting, a plaster, usually gypsum or calcium sulfate, is mixed with talc, sand, asbestos, and sodium silicate and water to form a slurry. ...
Sand Casting: Introduction
Sand Casting is a process by which molten metal is poured in sand molds to produce parts in an economical manner. The sand mold is produced by compacting ...
eFunda: Properties of Aluminum Alloy AA 3004
eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...
Ceramic Mold Casting
Ceramic mold casting is similar to plaster mold casting. The pattern is made of plaster, ... Investment Casting · Permanent Mold Cast. Plaster Mold Casting ...
eFunda: Properties of Alloy Steel 319.0
eFunda: Properties of Alloy Steel 319.0. ... Alloy Steel 319.0. Home | Directory | Career | News | InfoStore | Industrial ...
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys.
eFunda: Properties of Aluminum Alloy AA 5154
eFunda: Properties of Aluminum Alloy AA 5154. ... Sponsored Links. AA 5154. Category, Aluminum Alloy. Class, Wrought. Composition. Element, Weight % ...
Investment Casting
Investment casting, lost wax casting process is used to make precision parts that may not need further machining. In ancient times this was used to make ...