Glossary » Materials » Alloys » Aluminum Alloy » Cast » 514.0

514.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 96.00% Aluminum (Al) and 4.00% Magnesium (Mg). It is usually used in sand casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information

Other common Cast Aluminum Alloys include 201.0, 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 319.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, A443.0, B443.0, C443.0, 518.0, 520.0, 535.0, A535.0, B535.0, 712.0, 713.0, 771.0, and 850.0.
Related Glossary Pages

Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Polymers: Polyamide
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1059
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 15% Glass Fiber Reinforced
Glossary: Materials: Alloys: Aluminum Alloy: Cast: 354.0
Glossary: Materials: Polymers: Fluoroplastics: Poly(chloro-Trifluoro-Ethylene)
Glossary: Design: Oring: Material: Fluorocarbon
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 5457
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Polymers: Polyamide
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1059
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Polymers: Polyamide: Nylon (PA 66): 15% Glass Fiber Reinforced
Glossary: Materials: Alloys: Aluminum Alloy: Cast: 354.0
Glossary: Materials: Polymers: Fluoroplastics: Poly(chloro-Trifluoro-Ethylene)
Glossary: Design: Oring: Material: Fluorocarbon
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 5457
Related Pages

eFunda: Temper Designations of Aluminum Alloys
A list of temper designations and their definitions for aluminum alloys.
eFunda: Listing of Cast Alumnium Alloys 3xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 3xx.0 Aluminum Alloys.
eFunda: Properties of Aluminum Alloy AA 3004
eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...
Shell Mold Casting
Shell mold casting produces better surface finish, better dimensional tolerances, ... Sand Casting. Shell Mold Casting. Squeeze Casting. Resources ...
Permanent Mold Casting
Typically cast iron or Meehanite (a dense cast iron) is used as the mold material and the cores are made from metal or sand. Cavity surfaces are coated with ...
eFunda: Listing of Cast Copper Alloys
eFunda: Listing of Cast Copper Alloys. ... Cu Alloy Types. Cast Alloys. Wrought Alloys. Cu Alloy List. UNS C1xxxx · UNS C2xxxx · UNS C3xxxx · UNS C4xxxx ...
Sand Casting: Introduction
Sand Casting is a process by which molten metal is poured in sand molds to produce parts in an economical manner. The sand mold is produced by compacting ...
eFunda: Properties of Aluminum Alloy AA 5154
eFunda: Properties of Aluminum Alloy AA 5154. ... Sponsored Links. AA 5154. Category, Aluminum Alloy. Class, Wrought. Composition. Element, Weight % ...
Sand Casting: Design
Design considerations of casting design. Gating, section thicknesses, intersecting ribs,sink considerations.
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys.