Glossary » Materials » Alloys » Aluminum Alloy » Cast » 535.0
535.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 92.84% Aluminum (Al), 6.80% Magnesium (Mg), 0.18% Manganese (Mn), and 0.18% Titanium (Ti). It is usually used in sand casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information
Other common Cast Aluminum Alloys include 201.0, 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 319.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, A443.0, B443.0, C443.0, 514.0, 518.0, 520.0, A535.0, B535.0, 712.0, 713.0, 771.0, and 850.0.
Related Glossary Pages
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1086
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-17
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1211
Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A302 Grade B
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 5457
Glossary: Materials: Polymers: Epoxy: Unfilled: Casting Resins and Compounds
Glossary: Materials: Polymers: Melamine Formaldehyde: Cellulose Filled
Glossary: Materials: Alloys: Steel: Stainless Steel: AISI Type 348H
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Alloys: Copper Alloy: Wire: AWG-17
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Steel: Carbon Steel: AISI 1211
Glossary: Materials: Alloys: Steel: Alloy Steel: ASTM A302 Grade B
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 5457
Glossary: Materials: Polymers: Epoxy: Unfilled: Casting Resins and Compounds
Glossary: Materials: Polymers: Melamine Formaldehyde: Cellulose Filled
Glossary: Materials: Alloys: Steel: Stainless Steel: AISI Type 348H
Related Pages
eFunda: Listing of Wrought Aluminum Alloys
Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys. Wrought Alloys. Al Alloy List. Wrought: ...
eFunda: Temper Designations of Aluminum Alloys
A list of temper designations and their definitions for aluminum alloys.
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys.
Permanent Mold Casting
Typically cast iron or Meehanite (a dense cast iron) is used as the mold material and the cores are made from metal or sand. Cavity surfaces are coated with ...
eFunda: Typical Properties of Aluminum Alloys
Typical physical properties of aluminum alloys such as melting point, elastic modulus, poisson ration, thermal expansion coefficient, etc.
eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043
eFunda: Properties of Aluminum Alloy Aluminum Alloy AA 4043.
Sand Casting: Design
Design considerations of casting design. Gating, section thicknesses, intersecting ribs,sink considerations.
Shell Mold Casting
Shell mold casting produces better surface finish, better dimensional tolerances, ... Sand Casting. Shell Mold Casting. Squeeze Casting. Resources ...
eFunda: Properties of Aluminum Alloy AA 3004
eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...
Full Mold Casting
Full Mold Casting is similar to investment casting. ... The pattern is encased in a one-piece sand mold. As the metal is poured, the foam vaporizes, ...
