CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications

Materials

Design

Processes

Units

Formulas

Math
Glossary » Materials » Alloys » Aluminum Alloy » Cast » A443.0
A443.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 94.50% Aluminum (Al), 0.30% Copper (Cu), and 5.20% Silicon (Si). It is usually used in sand casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.

The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.

Additional Information
Other common Cast Aluminum Alloys include 201.0, 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 319.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, B443.0, C443.0, 514.0, 518.0, 520.0, 535.0, A535.0, B535.0, 712.0, 713.0, 771.0, and 850.0.
Related Pages
FREE Publications
CNC Machining Design Guide

Optimize your designs, reduce machining time, and lower your costs.

Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more publications