Glossary » Materials » Alloys » Aluminum Alloy » Cast » B535.0

B535.0 is categorized as Cast Aluminum Alloy. It is composed of (in weight percentage) 92.82% Aluminum (Al), 7.00% Magnesium (Mg), and 0.18% Titanium (Ti). It is usually used in sand casting.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information

Other common Cast Aluminum Alloys include 201.0, 206.0, A206.0, 208.0, 242.0, 295.0, 296.0, 308.0, 319.0, 336.0, 354.0, 355.0, C355.0, 356.0, A356.0, 357.0, A357.0, 359.0, 360.0, A360.0, 380.0, A380.0, 383.0, 384.0, A384.0, 390.0, A390.0, 413.0, A413.0, 443.0, A443.0, B443.0, C443.0, 514.0, 518.0, 520.0, 535.0, A535.0, 712.0, 713.0, 771.0, and 850.0.
Related Glossary Pages

Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Polymers: Polyimide
Glossary: Materials: Polymers: Polyaryletherketone: Poly(arylether-Ketone): 40% Glass Fiber Reinforced
Glossary: Materials: Alloys: Titanium Alloy: Wrought: 99.5 Ti
Glossary: Materials: Alloys: Titanium Alloy: Wrought
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 6205
Glossary: Materials: Polymers: Polystyrene: Rubber-Modified
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4621H
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Polymers: Polyimide
Glossary: Materials: Polymers: Polyaryletherketone: Poly(arylether-Ketone): 40% Glass Fiber Reinforced
Glossary: Materials: Alloys: Titanium Alloy: Wrought: 99.5 Ti
Glossary: Materials: Alloys: Titanium Alloy: Wrought
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Aluminum Alloy: Wrought: AA 6205
Glossary: Materials: Polymers: Polystyrene: Rubber-Modified
Glossary: Materials: Alloys: Steel: Alloy Steel: AISI 4621H
Glossary: Materials: Alloys: Steel: Stainless Steel
Related Pages

Sand Casting: Introduction
Sand Casting is a process by which molten metal is poured in sand molds to produce parts in an economical manner. The sand mold is produced by compacting ...
eFunda: Listing of Cast Aluminum Alloys
eFunda: Listing of Cast Aluminum Alloys. ... Al Alloy Types. Cast Alloys. Wrought Alloys. Al Alloy List. Wrought: ...
eFunda: Properties of Aluminum Alloy AA 3004
eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...
eFunda: Listing of Magnesium Alloys for Castings
Name, Processes and Available Forms. ASTM AM100A-T61, sand casting, permanent mold casting. ASTM AM60A-F, die casting. ASTM AS41A-F, die casting ...
eFunda: Properties of Aluminum Alloy B535.0
eFunda: Properties of Aluminum Alloy B535.0. ... 5xx.0 or x5xx.0 · 7xx.0 · 8xx.0. Resources. Bibliography. FREE Publications. What is ISO 9000 ...
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys
eFunda: Listing of Cast Alumnium Alloys 2xx.0 Aluminum Alloys.
Full Mold Casting
Full Mold Casting is similar to investment casting. ... The pattern is encased in a one-piece sand mold. As the metal is poured, the foam vaporizes, ...
eFunda: Metal Alloys Keyword Search Results
B535.0, Cast. 712.0, Cast. 713.0, Cast. 771.0, Cast. 850.0, Cast. AA 1050, Wrought. AA 1060, Wrought. AA 1100, Wrought. AA 1145, Wrought. AA 1199, Wrought ...
Plaster Mold Casting
In plaster mold casting, a plaster, usually gypsum or calcium sulfate, is mixed with talc, sand, asbestos, and sodium silicate and water to form a slurry. ...
Sand Casting: Allowance
Pattern finish allowance and wall thickness for various metals such as Aluminum, Copper Alloys, Cast Iron, Nickel Alloys, Steel, Magnesium Alloys, ...