Glossary » Materials » Alloys » Aluminum Alloy » Wrought » AA 1145
AA 1145 is categorized as Wrought Aluminum Alloy. It is composed of (in weight percentage) 99.45%(min) Aluminum (Al). It can be seen in forms of sheet, plate, and foil.
Aluminum is a silverish white metal that has a strong resistance to corrosion and like gold, is rather malleable. It is a relatively light metal compared to metals such as steel, nickel, brass, and copper with a specific gravity of 2.7. Aluminum is easily machinable and can have a wide variety of surface finishes. It also has good electrical and thermal conductivities and is highly reflective to heat and light.
The typical elastic modulus of aluminum alloys at room temperature (25°C) ranges from 70 to 79 GPa. The typical density of aluminum alloys ranges from 2.6 to 2.8 g/cm3. The typical tensile strength varies between 230 and 570 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.
Additional Information
Other common Wrought Aluminum Alloys include AA 1050, AA 1060, AA 1100, AA 1199, AA 1350, AA 2011, AA 2014, AA 2024, AA 2036, AA 2048, AA 2124, AA 2218, AA 2219, AA 2319, AA 2618, AA 3003, AA 3004, AA 3105, AA 4032, AA 4043, AA 5005, AA 5050, AA 5052, AA 5056, AA 5083, AA 5086, AA 5154, AA 5182, AA 5252, AA 5254, AA 5356, AA 5454, AA 5456, AA 5457, AA 5652, AA 5657, AA 6005, AA 6009, AA 6010, AA 6061, AA 6063, AA 6066, AA 6070, AA 6101, AA 6151, AA 6201, AA 6205, AA 6262, AA 6351, AA 6463, AA 7005, AA 7049, AA 7050, AA 7072, AA 7075, AA 7175, AA 7178, and AA 7475.
Related Glossary Pages
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Polymers: Fluoroplastics: THV-500
Glossary: Materials: Polymers: Polystyrene: Styrene / Acrylonitrile, Copolymer: 20% Glass Fiber Reinforced
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Alloys: Steel: Tool Steel
Glossary: Materials: Polymers: Fluoroplastics: THV-500
Glossary: Materials: Polymers: Polystyrene: Styrene / Acrylonitrile, Copolymer: 20% Glass Fiber Reinforced
Glossary: Materials: Alloys: Steel: Stainless Steel
Glossary: Materials: Alloys: Steel: Alloy Steel
Glossary: Materials: Alloys: Copper Alloy: Wrought
Glossary: Materials: Alloys: Copper Alloy: Cast
Glossary: Materials: Alloys: Steel: Carbon Steel
Glossary: Materials: Alloys: Steel: Tool Steel
Related Pages
eFunda: Classical Plate Equation
Classical plate equation, its derivation and associated assumptions.
eFunda: Plate Calculator -- Simply supported rectangular plate ...
This calculator computes the displacement of a simply-supported rectangular plate under a point load.
eFunda: Plate Calculator -- Clamped rectangular plate with ...
This calculator computes the displacement of a clamped rectangular plate under a uniform load.
eFunda: Listing of Wrought Aluminum Alloys
Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys. Wrought Alloys. Al Alloy List. Wrought: ...
eFunda: Listing of Titanium Alloys
Ti-5Al-2.5Sn, Wrought, Alpha alloy. Ti-5Al-2.5Sn-ELI (low O2), Wrought, Alpha alloy. Ti-5Al-5Sn-2Zr-2Mo-0.25Si, Wrought, Near alpha alloy ...
eFunda: Classical Plate Case Study
Plate calculators, rectangular and circular plates with various boundary and loading conditions.
eFunda: Plate Calculator -- Free-Simply supported circular plate ...
This calculator computes the displacement of a simply-supported circular plate with free edge under a uniformly distributed load.
eFunda: Properties of Aluminum Alloy AA 3004
eFunda: Properties of Aluminum Alloy AA 3004. ... Aluminum Alloys. General Information · Properties · Temper. Al Alloy Types. Cast Alloys · Wrought Alloys ...
eFunda: Listing of Magnesium Alloys for Sheets and Plates
eFunda: Listing of Magnesium Alloys for Sheets and Plates.
Strain Gage: Theoretical Background
A wire strain gage is made by a resistor, usually in metal foil form, bonded on an elastic backing. Its principle is based on fact that the resistance of a ...
