Materials Design Center Processes Unit Conversion Formulas Mathematics
 Calculators Discussion Forum Trade Publications Directory Service
Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Learn the best principles to negotiate the salary you deserve!

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications
Glossary » Materials » Alloys » Steel » Alloy Steel » AISI 6150H
AISI 6150H is an H-Steel grade Alloy Steel. It is commonly called AISI 6150H Chromium-vanadium steel. It is composed of (in weight percentage) 0.47-0.54% Carbon (C), 0.60-1.00% Manganese (Mn), 0.75-1.20% Chromium (Cr), 0.035% Phosphorus (P), 0.040% Sulfur (S), 0.15-0.30% Silicon (Si), 0.15%(min) Vanadium (V), and the base metal Iron (Fe). Other designations of AISI 6150H alloy steel include UNS H61500 and AISI 6150H.
Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Alloy steels are steels that exceed the element limits for Carbon steels. However, steels containing more than 3.99% chromium are classified differently as stainless and tool steels. Alloy steels also includes steels that contain elements not found in carbon steels such as nickel, chromium (up to 3.99%), cobalt, etc.

The typical elastic modulus of alloy steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of alloy steels is about 7.85 g/cm3. The typical tensile strength varies between 758 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.

Related Pages
Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.