Materials Design Center Processes Unit Conversion Formulas Mathematics
 Calculators Discussion Forum Trade Publications Directory Service
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide

more free publications
Glossary » Materials » Alloys » Steel » Alloy Steel » ASTM A517 Grade L
ASTM A517 Grade L is categorized as Alloy Steel. It is composed of (in weight percentage) 0.13-0.20% Carbon (C), 0.40-0.70% Manganese (Mn), 0.035% Phosphorus (P), 0.04% Sulfur (S), 0.20-0.35% Silicon (Si), 1.15-1.65% Chromium (Cr), 0.25-0.40% Molybdenum (Mo), 0.04-0.10% Titanium (Ti), 0.20-0.40% Copper (Cu), 0.0015-0.005% Boron (B), and the base metal Iron (Fe). Another common designation of ASTM A517 Grade L alloy steel is UNS K11682.
Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Alloy steels are steels that exceed the element limits for Carbon steels. However, steels containing more than 3.99% chromium are classified differently as stainless and tool steels. Alloy steels also includes steels that contain elements not found in carbon steels such as nickel, chromium (up to 3.99%), cobalt, etc.

The typical elastic modulus of alloy steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of alloy steels is about 7.85 g/cm3. The typical tensile strength varies between 758 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.

Related Pages
Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Metal 3D Printing Design Guide

Direct Metal Laser Sintering (DMLS) 3D printing for parts with reduced cost and little waste.

CNC Machining Design Guide