Materials Design Center Processes Unit Conversion Formulas Mathematics
 Calculators Discussion Forum Trade Publications Directory Service
World Pumps

Major news, innovation and real-life applications for pumps and ancillary equipment.

Power Transmission

Gear drives, bearings, motors, clutches, couplings, machine controls, sensors and components.

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

Autonomous Vehicle Engineering

The No. 1 media source for those developing the next generation mobility solutions.

more free magazines
Glossary » Materials » Alloys » Steel » Alloy Steel » ASTM A645
ASTM A645 is categorized as Alloy Steel. It is composed of (in weight percentage) 0.30-0.60% Carbon (C), 0.30-0.60% Manganese (Mn), 0.025% Phosphorus (P), 0.025% Sulfur (S), 0.20-0.35% Silicon (Si), 4.75-5.25% Nickel (Ni), 0.20-0.35% Molybdenum (Mo), 0.020% Nitrogen (N), % 0.02-0.12% Aluminum (Al), and the base metal Iron (Fe). Another common designation of ASTM A645 alloy steel is UNS K41583.
Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Alloy steels are steels that exceed the element limits for Carbon steels. However, steels containing more than 3.99% chromium are classified differently as stainless and tool steels. Alloy steels also includes steels that contain elements not found in carbon steels such as nickel, chromium (up to 3.99%), cobalt, etc.

The typical elastic modulus of alloy steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of alloy steels is about 7.85 g/cm3. The typical tensile strength varies between 758 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.