Materials Design Center Processes Unit Conversion Formulas Mathematics
 Calculators Discussion Forum Trade Publications Directory Service
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.

more free publications
Glossary » Materials » Alloys » Steel » Carbon Steel » ASTM A516 Grade 70
ASTM A516 Grade 70 is categorized as Carbon Steel. It is composed of (in weight percentage) 0.31% Carbon (C), 0.85-1.20% Manganese (Mn), 0.035% Phosphorus (P), 0.04% Sulfur (S), 0.15-0.30% Silicon (Si), and the base metal Iron (Fe). Another common designation of ASTM A516 Grade 70 carbon steel is UNS K02700.
Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Carbon steels alloying elements do not exceed these limits: 1% carbon, 0.6% copper, 1.65% manganese, 0.4% phosphorus, 0.6% silicon, and 0.05% sulfur.

The typical elastic modulus of carbon steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of carbon steels is about 7.85 g/cm3. The typical tensile strength varies between 276 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.

Related Pages
Essentials of Manufacturing

Information, coverage of important developments and expert commentary in manufacturing.

Injection Molding Design Guide

Guide for high quality and cost-effective plastic injection molding.

Salary Expectation

8 things to know about the interview question "What's your salary expectation"?

3D Scanners

A white paper to assist in the evaluation of 3D scanning hardware solutions.